NORGREN solenoid valve V60A711A-A213J compressed air

NegotiableUpdate on 12/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

NORGREN solenoid valve V60A711A-A213J compressed air $r $n working pressure: 1.5... 7 bar flow rate:>400 l/min (based on 6 bar intake pressure, 1 bar pressure drop) response time: 20 m/s installation: base plate installation, installation hole installation, thread installation installation position: arbitrary, recommended horizontal ambient temperature: -5&# 176; C … +50° The air supplied by C must be sufficiently dry to avoid temperatures below+2; Ice formation at C (+35&# 176; F)

Product Details

NORGREN solenoid valve V60A711A-A213J compressed air

Tube connected solenoid valves V50... V53 3/2, 5/2 or 5/3, G1/8... G1/2

• Electromagnetic driven and pneumatic driven slide valve • High flow tube connected solenoid valve

• Compact and sturdy design • Low power energy-saving solenoid valve • Flexible straight through and bottom plate installation options

Technical parameters Material medium: filtered (40 µ m) lubrication

Installation position for non lubricated compressed air: straight through or bottom plate

Environmental temperature: Pilot model: -5 ° C...+60 ° C Solenoid valve model: -5 ° C...+50 ° C

The gas supply must be sufficiently dry to prevent freezing when the temperature drops below+2 ℃.

Valve body/bottom plate: die cast aluminum alloy or aluminum alloy, white paint soft seal valve core: NBR/aluminum alloy

Installation plate/screw: Steel spring: Stainless steel voltage fluctuation range ± 10%

Rated value 100% continuous power inlet diameter 0.6 mm; V50 0.8 mm; V51... V53

Electrical connection (corresponding to the selected coil) EN 175301-803- Table C, 15 mm, V50

Industrial standard, 22 mm, V51... V53 electromagnetic coil 4-position x 90 °

Manual control press and rotate lock (plastic) protection level IP 65 (with sealing plug)

VCB10 solenoid valve: G1/8 compact design, suitable for industrial automation applications • high flow rate • LED light standard for junction box

• Stable and reliable • Bottom plate installation technical parameters Material: Valve body: Aluminum alloy Valve core: Aluminum

Seals: NBR, HNBR Manual buttons: Plastic End caps: Plastic media: Lubricated or non lubricated compressed air filtered by 40 µ m Drive mode: Electromagnetic pilot drive

Working pressure: 1.5... 7 bar Flow rate:>400 l/min (based on 6 bar intake pressure, 1 bar pressure drop) Response time: 20 m/s Installation: Bottom plate installation, installation hole installation, threaded installation Installation position: arbitrary, recommended horizontal ambient temperature: -5 ° C...+50 ° C The supplied air must be sufficiently dry,

To prevent freezing at temperatures below+2 ° C (+35 ° F)

NORGREN solenoid valve V60A711A-A213J compressed air