Needle flame tester ZY-2

Basic Introduction:

1The needle flame test isIEC60695 -11-5TheGB/T5169.5-2008TheGB4706.1-2005The standard stipulates the use of small flame ignition source programs

Simulation test project.

2TheZY-2The needle flame tester uses a specified size(Φ0.9mm )Needle shaped burner, supplied with specific gas(butane), in order to 45Fixed angle timing

Evaluate the ignition hazard of small flames caused by fault conditions inside the equipment based on whether the test sample ignites and the duration and length of combustion.

3TheZY-2The needle flame tester is suitable for lighting, low-voltage electrical appliances, household appliances, machine tool appliances, motors, power tools, electronic instruments, electrical instruments, etc

The research, production, and quality inspection departments of electrical connectors, accessories, and other electrical and electronic equipment, as well as their components and assemblies, are also applicable to insulation materials and engineering plastics

Or other solid combustible material industries.

Technical Specifications:

1Needle shaped burner: inner hole Φ0.5mm±0.1mm, outer diameter ≤Φ0.9mm, Long ≥35mmStainless steel
2Burner angle: tilted 45°(During the experiment)Or vertically(When adjusting the flame height)
3Burning time:0-999.9s±0.1sadjustable(The general choice is30s)
4Holding time:0-999.9s±0.1sAutomatic recording, manual pause
5Flame height:12mm±1mm (Equipped with height measuring instruments)
6Gas application:95%Butane gas(Bottled lighter gas can be used)
7Temperature testing range:0~1000℃
8Flame temperature requirements: from100℃±2℃ rises to700℃±3The time at ℃23.5Seconds ±1Within seconds
9Thermocouple for temperature measurement: Φ0.5mmImported armor（KType) thermocouple
10Background of the experiment: Black background
11Test process: Automatic control of the test program, independent ventilation
12Reference standards:IEC60695 -11-5TheGB/T5169.5-2008TheGB4706.1-2005
13Studio volume:0.5 Cube, stainless steel chassis (can be customized according to customer requirements)0.75 Cube or 1 cube ）
14Equipment external dimensions:1000mmWidth x650mmDeep x1300mmtall