PHYM series pressure foam liquid storage tank

NegotiableUpdate on 10/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

PHYM series pressure type foam liquid storage tank I. Description: foam liquid is stored in a rubber made thin-wall rubber capsule with high strength, high elasticity and high flexibility. Pressure water only enters and exits the capsule, separated from foam liquid. The remaining foam liquid after fire fighting can still be used, saving foam liquid and reducing fire fighting cost

Product Details

PHYM series pressure foam liquid storage tank

1、 Explanation
High strength, high elasticity and high flexibility thin wall rubber capsules made of rubber are used to store foam liquid inside. Pressure water only flows in and out of the capsules and is separated from foam liquid. The remaining foam liquid can still be used after extinguishing the fire, saving foam liquid and reducing the cost of extinguishing the fire. With this tank fire extinguishing system, the mixing ratio is quite stable, accurate and reliable, and can provide high-quality foam mixture. With this type of tank, the pressure loss of mixing is the smallest, the foam ejected has large energy and strong penetration ability. High, medium and low expansion foam devices can be used.

work pressure		0.6～1.6 MPa
rated pressure		1.0 MPa
Test pressure	intensity	2.4 MPa
	seal	1.8 MPa
Tank capacity		500～100000 L
Equipped with a proportional mixer		PHY4～100
Proportional mixer mixing ratio		3% or 6%

2、 Product structure and main technical parameters
PHYM系列压力式泡沫液储罐(图1)

Main technical parameters

Foam model	Proportional mixer (PHY) provided	water inlet （DN）	Mixed liquid outlet （DN）	drain outlet （DN）	slag discharge port （DN）	L	L2	H
PMG5	PHY4	DN50	DN50	DN20	DN20	1465	1078	660
PMG10	PHY8	DN65	DN65	DN25	DN25	1790	1303	735
	PHY16	DN100	DN100	DN32	DN32		1340
PMG15	PHY8	DN65	DN65	DN25	DN25	2460	1303	735
	PHY16	DN100	DN100	DN32	DN32		1340
PMG20	PHY16	DN100	DN100	DN32	DN32	2370	1544	812
	PHY24	DN150	DN150	DN50	DN50		1609
PMG25	PHY16	DN100	DN100	DN32	DN32	2830	1544	812
	PHY24	DN150	DN150	DN50	DN50		1609
PMG30	PHY24	DN150	DN150	DN50	DN50	2900	1699	837
	PHY32
PMG40	PHY24	DN150	DN150	DN50	DN50	2670	2183	915
	PHY32
PMG50	PHY32	DN150	DN150	DN50	DN50	3190	2183	915
	PHY48
PMG55	PHY32	DN150	DN150	DN50	DN50	3454	2183	915
	PHY48
PMG76	PHY48	DN150	DN150	DN50	DN50	3197	2587	1045
	PHY64	DN200	DN200	DN65	DN65		2630
PMG80	PHY48	DN150	DN150	DN50	DN50	3330	2587	1045
	PHY64	DN200	DN200	DN65	DN65		2630
PMG100	PHY64	DN200	DN200	DN65	DN65	4000	2630	1045
	PHY76
PMG110	PHY64	DN200	DN200	DN65	DN65	4333	2630	1045
	PHY76
PMG130	PHY76	DN200	DN200	DN65	DN65	4285	2737	1125
	PHY100	DN250	DN250				2769

3、 Instructions for use
1. When selecting, indicate the model of the proportional mixer used;
2. The size and piping connected to the proportional mixer are the responsibility of our company;
3. It needs to be ordered separately with the special pump assembly for foam concentrate injection as an accessory;
4. Installing a liquid level gauge as an accessory requires separate ordering;
5. The foam liquid storage tank above 4000L is equipped with a climbing ladder;
6. The foam liquid storage tank larger than 10000L should not be used.