Piezoelectric vibration sensor

NegotiableUpdate on 12/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

With the popularization of DCS systems, the functions of traditional secondary meters can be basically implemented by DCS systems, which only require a 4-20mA signal input. Our company has developed an improved two-line integrated chassis vibration transmission sensor that can meet this requirement well. The improved model has multiple * properties such as small size, light weight, stability and reliability. The outer shell is made of stainless steel. The $r $n integrated vibration transmitter utilizes the principle of magnetic electric oscillator motion cutting magnetic field lines to convert the amplitude of the generated voltage signal into a standard current signal output. The signal output has a misconnection protection function. To avoid damage caused by misconnection on site

Product Details

2、 Application scope:

The casing vibration transmitter is widely used for vibration measurement of rotating machinery and other equipment such as fans, water pumps, compressors, steam turbines, etc. in industries such as power, steel, and petrochemicals. The various vibration levels during equipment operation are important indicators for estimating whether the equipment is running normallyDKS2240The series of chassis vibration transmitters for vibration measurement is an economical and high-quality solution.

The series of shell vibration transmitters is complete, and according to the selection, the shell vibration speed and displacement can be measured. Users can refer to the selection guide to choose the product that is suitable for themselves.

The casing vibration transmitter has a two-wire system, which follows the《GB 3836.04-2000》Design and produce to meet the application requirements of explosion-proof environments. According to the needs of users, we can provide intrinsic safety explosion-proof certification.

3、 Technical indicators

Range:

3. 1Vibration velocity range0～100mm/sEffective value; (Optional)

3. 2Vibration displacement range0～1000μmPeak to peak value (measurement type and range can be customized according to user requirements);

3. 3Resolution:0.05%；

3. 4Warm float:≤ 0.1%／℃；

3. 5Applicable temperature:（-20～ +80℃）；

3. 6Power Supply:+18～+35 V；

3. 7Can withstand large impacts:2000g；

3. 8Output:4～20mA，1--5V，1-10V. (Optional) At full scaleVbuffor1Vp-p；

3.9: Load: Large can drive500ΩLoad;

3.10Frequency response:10～1000Hz

4.5～1000Hz(can be changed according to user requirements);

3.11Lateral sensitivity:<2%；

3.12: Dimensions:φ35×75mm

3.13Weight:400g左右；

3.14Shell material: Stainless steel (other materials can be used according to user requirements).

4、 Selection instructions: Determine through communication with our company personnel based on the parameters.

5、 Precautions

5．1 The transmitter should be protected from severe impact and knocking.

5．2 During transportation and storage, it should be placed inside the packaging box.