Plastic melt flow rate meter and grease dissolution meter

NegotiableUpdate on 10/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Overview of WYR-400C Plastic Melt Flow Rate Tester and Lipolysis Tester. The Lipolysis Tester is suitable for engineering plastics such as polyethylene, polyarylsulfone, fluoroplastics, nylon, etc. with high melting temperatures, as well as for testing plastics with low melting temperatures such as polyethylene, polystyrene, polypropylene ABS resin, and polyoxymethylene resin

Product Details

Overview of Plastic Melt Flow Rate Meter and Resin Dissolving Meter
WYR-400C plastic melt flow rate meter and grease dissolution meterIt is suitable for testing engineering plastics such as polyethylene, polyarylsulfone, fluoroplastics, nylon, etc. with high melting temperatures, as well as plastics such as polyethylene, polystyrene, polypropylene ABS resin, and polyoxymethylene resin with low melting temperatures. Specially suitable for use in colleges and universities, research institutions, quality inspection agencies, plastic production enterprises, plastic products, and the petrochemical industry.
This instrument is easy to operate and master, with a color full touch screen that is intuitive and clear. The MFR can be automatically calculated by inputting the sample total after the experiment is completed. The program design is user-friendly and can save the last 40 sets of experimental data. According to the material type and experimental time, the program can query and automatically record the commonly used test temperature points of the customer for optimization control (note: in simple terms, the instrument will automatically record the temperature control parameters for each time the customer uses the temperature point the most, and then optimize to achieve the best control effect). The temperature control stability is high and the accuracy is high. After constant temperature, the temperature hardly fluctuates. After starting the experiment, there are text and prompt sounds for each operation step, and the results of this and previous experiments can be printed!
Plastic melt flow rate meter and grease dissolution metermeet the standard

Standard Number	Standard Name
GB/T 3682-2000	Mass flow rate of thermoplastic melt
ISO 1133-1:2011	Plastics—Determination of the meltmass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics – Part 1:Standard method

Plastic melt flow rate meter and grease dissolution meterTechnical Specifications
Environmental temperature: within the range of 10 ℃ to 40 ℃;
The relative humidity of the environment is within 30% -80%;
1. Extrusion discharge part:
出料口直径： Φ2.095±0.005 毫米
Discharge port length: 8.000 ± 0.025 millimeters
Loading cylinder diameter: Φ 9.550 ± 0.025 millimeters
Loading cylinder length: 152 ± 0.1 millimeters
Piston rod head diameter: 9.475 ± 0.015 millimeters
Piston rod head length: 6.350 ± 0.100 millimeters
2. Test weight (relative error ≤ 0.5%)

No.1 (Combination)	0.325kg	Number 5	4.675 kg
No. 2	0.875 kg	Number 6	5.000 kg
No. 3	1.835 kg	No. 7	2.500 kg
No. 4	3.475 kg	No. 8	2.915 kg

3. Standard Test Load (Level 8)
4. Constant temperature range: 120 ℃ -450 ℃.
5. Constant temperature accuracy: ± 0.2 ℃
6. Power supply voltage: 220V ± 10% 50Hz
7. Working environment: ambient temperature of 5 ℃ -50 ℃; The relative humidity of the environment is between 30% and 80%; There is no corrosive medium around and no strong air convection; There is no vibration or strong magnetic field interference around.