Pneumatic punching machine (wire and cable insulation sheath)

NegotiableUpdate on 12/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The K-QP3 pneumatic punching machine (wire and cable insulation sheath) is commonly used to cut insulation and sheath materials of rubber, plastic, and wire and cable into standard shaped test pieces for testing purposes. According to customer requirements, configure the cutting dies of GB/T529-2008, GB/T528-2009, and GB/T2951.11-2008 standards, and cut rubber standard test pieces for aging, thermal extension, tensile testing, and tear strength testing.

Product Details

K-QP3Pneumatic punching machine (wire and cable insulation sheath)

1、 Product Introduction　

Pneumatic punching machine (wire and cable insulation sheath)Commonly used to cut insulation and sheath materials of rubber, plastic, wires and cables into standard shaped test pieces for testing purposes.

Pneumatic punching machine (wire and cable insulation sheath)When cutting test pieces, according to customer needs, configure cutting dies according to GB/T529-2008, GB/T528-2009, GB/T2951.11-2008 standards to cut rubber standard test pieces for aging, thermal extension, tensile testing, and tear strength testing.

2、 Main technical parameters

1Make dumbbell test pieces with a thickness of 0.8-2.0mm

2Impact stroke: 110mm

3Gas source pressure: 0.8MPa;

4Impact force: about 1.5T;

5Sample table: 140mm × 300mm;

6National standard dumbbell knife mold: 50mm × 8.5mm × 4mm, 75mm × 12.5mm × 4mm;

7Dumbbell knife molds can be customized.