Post paid multi-user energy meter SNH2629-P

1Post paid multi-user energy meter SNH2629-PProduct Introduction

1. SNH2629-P ordinary multi-user energy meter accurately measures active energy in both positive and negative directions to prevent electricity theft.

2. Clear display of electricity consumption information for each household through a digital tube, with one household displayed every four seconds.

3. Adopting a dual CPU structure, with one supervisor for metering and the other for communication, display, and indication, communication does not affect metering.

4. Wide range of 1 O (50) A, suitable for users with large load changes.

5. Modify single-phase and three-phase households according to user needs for easy use.

6. The internal power supply is three-phase, but the power supply is out of phase. The electricity meter can still measure normally even if it works normally.

7. The use of highly reliable intelligent chips can control the power on and power-off of up to 39 single-phase households and 13 three-phase households, facilitating property management.

8. Optional dual display (pull out the separate display screen).

9. Equipped with computer remote meter reading function (optional for users).

10. The watch case is formed by one-time stamping, with good sealing performance.

11. Using dedicated wiring terminals and double bolt crimping, it is safe and reliable to use.

12. The communication circuit design is stable and can effectively avoid signal interference caused by lightning strikes and other factors.

13. Equipped with power display function, it can intuitively display the current power consumption of the user, making it easy to calibrate the meter on site.

14. Adopting high-precision current transformers, it does not generate heat during operation, has good electrical isolation effect, strong overload capacity, and long service life.

15. According to user requirements, voltage, current, active power, apparent power, power factor and other data can be provided to facilitate the integration of electricity consumption information into the management information system of the unit.

IIPost paid multi-user energy meter SNH2629-PTechnical Specifications

1. Number of households measured: 39 single-phase households and 13 three-phase households

2. Working voltage: AC1 50-250V

3. Calibration current: 10 (50) A

4. Starting current: 0.5% IB

5. Working temperature: 20 ℃~60 ℃

6. Accuracy level: 2. O level, 1 level

7. Low overall power consumption (<6V A) with significant energy-saving effect