Product parameters of elastic recovery and compressive strain tester for impression materials

Product parameters of elastic recovery and compressive strain tester for impression materialsProduct parameters of elastic recovery and compressive strain tester for impression materials

1Instrument Introduction:

Used to determine when taking impressions from oral or craniofacial tissuesA testing instrument for determining whether the material has the required elastic properties to recover appropriately from its deformed state. A standard testing instrument for determining whether the elastic impression material has flexibility and rigidity after forming an impression.

IIReference standards:

YY 1027-2018

IIITechnical Specifications:

control panel:7-inch color touch screen (with optional Chinese and English interfaces)

Control system: Industrial gradePLC+high-performance microprocessor

Operation mode: Full touch operation, can set, call, and modify test programs

Scope of stress testing:0-100N can choose other ranges and accuracies

Accuracy:0.05%FS

Displacement velocity:1-300mm/min adjustable

Displacement accuracy:0.01mm

Test board:15mm * 15mm thick 2mm

The compression amount is:4mm ±0.1mm

Data output: elastic recovery, compressive strain

Optional computer: data traceability, curve display, high collection frequency

Printer: Embedded Mini Printer

One set of sample molding molds

power supply220V 50HZ

4Configuration List:

host1 unit;

Instruction Manual1 copy;

Certificate of Conformity1 copy;

Warranty Card1 copy;

Delivery Receipt1 copy;

nameplate1 piece;

power cord1 piece;

1Instrument Introduction:

A testing instrument used to determine whether the material has the necessary elastic properties to properly recover from its deformed state when taking out impressions from oral or craniofacial tissues. A standard testing instrument for determining whether the elastic impression material has flexibility and rigidity after forming an impression.

IIReference standards:

YY 1027-2018

IIITechnical Specifications:

Control panel: 7-inch color touch screen (optional Chinese and English interfaces)

Control system: industrial grade PLC+high-performance microprocessor

Operation mode: Full touch operation, can set, call, and modify test programs

Pressure testing range: 0-100N, other ranges and accuracies can be selected

Accuracy: 0.05% FS

Displacement speed: adjustable from 1-300mm/min

Displacement accuracy: 0.01mm

Test board: 15mm * 15mm thick 2mm

Compression amount: 4mm ± 0.1mm

Data output: elastic recovery, compressive strain

Optional computer: data traceability, curve display, high collection frequency

Printer: Embedded Mini Printer

One set of sample molding molds

Power supply: 220V 50HZ

4Configuration List:

1 host;

1 copy of instruction manual;

1 certificate of conformity;

1 warranty card;

One copy of the delivery receipt;

1 nameplate;

1 power cord;