Programmable sand and dust test chamber

NegotiableUpdate on 02/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Programmable sand and dust test chamber

Product Details

Programmable sand and dust test chamber

The programmable sand and dust test chamber is used to test the sealing performance of electrical, electronic, automotive, motorcycle and other products, the ability of products to work in environments with free settling of dust and no obvious air flow, and the ability of products to work in outdoor places with strong airflow and a large amount of sand and dust.

Create Chinese quality instruments with the spirit of craftsmanship

technical specifications

PRODUCT MODEL	LS-SC-150	LS-SC-225	LS-SC-512	LS-SC-1000
Inner box size (mm)	500600500	500750600	800800800	100010001000
TECHNICAL INDEX	The standard spacing for metal screen mesh is 50mm
	Wire diameter 75um
	Airflow speed ≥ 0~3.5m/s
	Dust particle size: 45um (particle size ≤ 45um accounts for more than 50%)
	Talc powder dosage: 2kg~4kg/m3
Powder spraying and dust reduction form	Free falling dust type: using a centrifuge to blow sand and dust to the box to replace 1/5 of the height and allow it to settle freely. Blowing sand and dust: Bottom air pressure spraying, adjustable in three levels of pressure.
Dust blowing cycle	Cycle control can control the total test time, as well as program the dust blowing time and stop time for periodic operation.
vacuum system	Equipped with pressure gauge, air filter, pressure regulator, and vacuum pump (specified when ordering)
control system	Color touch screen controller or key LCD display controller
power supply	AC380V±10% 50/60Hz
Standard configuration	Two sample racks, one dust sieve, and one instruction manual