-
E-mail
market09@aolipump.com
-
Phone
13661648777
-
Address
No. 1888 Huiwang Road, Jiading District, Shanghai
Oli Machinery (Group) Co., Ltd
market09@aolipump.com
13661648777
No. 1888 Huiwang Road, Jiading District, Shanghai
QBY series diaphragm pump
This series of diaphragm pumps is a novel type of pump currently available in China. For various corrosive liquids, liquids with particles, high viscosity, easy to play, explosive, toxic liquids, ceramic glaze slurry, jam, glue, oil tanker bottom oil recovery, temporary pouring tanks and other liquids, they can be completely drained and absorbed. Its performance parameters are comparable to those of GermanyWLLDENPUMPSThe United States'MARooneWP∪MPSclose. The materials used for the components flowing through the pump body are stainless steel, aluminum alloy, cast iron, and alloy. The diaphragm is made of four types of materials according to different liquids: nitrile rubber, fluororubber, hydrogen butadiene rubber, and polytetrafluoroethylene.
1Traffic:0-30m3/h;
2Lift:0-50m;
3Caliber:10-100mm;
4Temperature:-15-+120℃;
5Stress0.1-0.7MPa;
6Self suction height:5-7m。
1
QBY diaphragm pumpNo need for irrigation, with a suction range of up to7m, Lift up to 50m, outlet pressure ≥ 6kgf/cm2;、 The QBY diaphragm pump has spacious flow and good passing performance, allowing for a maximum particle diameter of up to 10mm Mud and impurities cause minimal wear on the pump;
2
QBY diaphragm pumpThe head and flow rate can be infinitely adjusted through the opening of the air valve (the air pressure can be adjusted)Between 1-7kgf/cm2);
QBY diaphragm pumpCan transport viscous liquids (viscosity in)Below 10000 centipoise);
3The pump has no rotating parts and no shaft seal. The diaphragm completely separates the pumped medium from the moving parts and working medium of the pump, and the conveyed medium will not leak outward. So when pumping toxic, easily reactive or corrosive media, it will not cause environmental pollution and endanger personal safety;
4
QBY diaphragm pump does not require electricity and is safe and reliable to use in flammable and explosive places;
、 QBY diaphragm pumpCan work submerged in a medium;
5The QBY diaphragm pump is convenient to use, reliable in operation, and can be easily started and stopped by simply opening and closing the gas valve. Even if it runs for a long time without medium or suddenly stops due to unexpected situations, the pump will not be damaged. Once overloaded, the pump will automatically stop, with self-protection performance. When the load returns to normal, it will automatically start and run again;
6The pump has a simple structure and few vulnerable parts. It is easy to install and maintain, and the medium transported by the pump will not come into contact with itValve, connecting rod and other moving parts, unlike other types of pumps where performance gradually decreases due to wear of rotor, piston, gear, blade and other components ;This pump does not require oil lubrication, and even when idling, it has no impact on the pump, which is a major feature of this pump.
【main purpose】
1. Pump peanut butter, kimchi, mashed potatoes, red sausage, jam apple puree, chocolate, etc.
2. Pump paint, gum, and pigment.
3. Adhesive and glue, all types can be pumped up.
4. Various types of tiles, porcelain, bricks, and ceramic glazes.
5. After drilling the oil well, use a pump to suck up sediment and grout.
6. Pump various emulsions and fillers.
7. Pump various types of sewage.
8. Use a pump as an oil tanker and a barge to clear and extract sewage from the warehouse.
9. Hops and fermented powder slurry, syrup, sugar dense.
10. Pump water from mines, tunnels, ore dressing, and slag. Pump cement grout and mortar.
11. Various rubber pastes.
12. Various abrasives, corrosives, petroleum and mud, cleaning oil stains, and general containers.
13. Various highly toxic, flammable, and volatile liquids.
14. Various strong acids, strong alkalis, and highly corrosive liquids.
15. Various high-temperature liquids can withstand up to 150 ℃.
16. As a front-end pressure feeding device for various solid-liquid separation equipment.
| serial number | model | traffic (m3/h) |
head (m) |
outlet pressure (kbf/cm2) |
suction lift (m) |
Maximum allowable particle diameter (mm) | Maximum gas supply pressure (kbf/cm2) | Maximum gas supply consumption (m3/min) |
| 1 | QBY-10 | 0~0.8 | 0~50 | 6 | 5 | 1 | 7 | 0.3 |
| 2 | QBY-15 | 0~1 | 0~50 | 6 | 5 | 1 | 7 | 0.3 |
| 3 | QBY-25 | 0~2.4 | 0~50 | 6 | 7 | 2.5 | 7 | 0.6 |
| 4 | QBY-40 | 0~8 | 0~50 | 6 | 7 | 4.5 | 7 | 0.6 |
| 5 | QBY-50 | 0~12 | 0~50 | 6 | 7 | 8 | 7 | 0.9 |
| 6 | QBY-65 | 0~16 | 0~50 | 6 | 7 | 8 | 7 | 0.9 |
| 7 | QBY-80 | 0~24 | 0~50 | 6 | 7 | 10 | 7 | 1.5 |
| 8 | QBY-100 | 0~30 | 0~50 | 6 | 7 | 10 | 7 | 1.5 |