Qiya 10 meter automatic double door curing room, non-standard customized curing room

NegotiableUpdate on 01/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product time: September 9, 2023 Brief description: Plastic film curing room Walk in composite film aging curing room Control method and features: Balanced temperature control system (BTHC), controls SSR in P.I.D. mode (saving 30% electricity compared to ordinary ON/OFF control) to make the heating amount of the system equal to the heat loss, so it can be used stably for a long time.

Product Details

1、 Performance specifications

1.1 Model: QYLG-10000HK

1.2 Temperature control range: RT+10 ℃~80 ℃ (adjustable)

1.3 Temperature resolution: 0.1 ℃

1.4 Temperature deviation degree: ≤±3℃

1.5Compliant with standards

The design of the maturation room fully considers the customer's usage situation and relevant standards in the field involved, including body standards, electronic and electrical standards, etc. This standard is as follows:

（1) Environmental Testing for Electrical and Electronic Products GB/T2423.2-2001

（2) Code for Design of Low Voltage Distribution GB50054-95

（3) Design Code for Power Supply and Distribution GB5002S2-95

（4) Code for Construction and Acceptance of Grounding Devices in Electrical Equipment Installation Engineering

（5) Classification of Combustion Performance of Building Materials

（6) Code for Acceptance of Construction Quality of Ventilation and Air Conditioning Engineering

IIProtector

7.1 Protective devicesTransmission chain limit protection

Overload relay for electric motor

Leakage protector 、 Circuit breaker Temperature Overrise Preventer

Heater air burning prevention device

motor(Fan/) Overload Relay

Wiring circuit breaker 、 Overtemperature protection, buzzer

3、 Request equipment and facilities

8.1 Power Supply: AC380V 3 Φ 50Hz

Total power of equipment:58KW

The allowable range of voltage fluctuation is within ± 5% of the rated voltage

The possible voltage range for operation is the rated voltage±10%）

8.2 Grounding resistance: below 100 Ω.

4Placement and environmental conditions for use

The placement location and usage environment of this maturation room must meet the following conditions. If unable to meet the requirements, please make sure to contact and discuss with Yu in advance.

① Temperature:+5~+35 ℃

② Humidity: not exceeding 85% RH

③ Atmospheric pressure: 80KPa to 106KPa

④ No direct sunlight or direct radiation from other heat sources.

⑤ No flammable or corrosive gas atmosphere.

⑥ There is no strong airflow convection, strong electromagnetic field influence, or strong vibration around.

⑦ Wet steam and less dust.

⑧ Easy power supply.

⑨ The floor surface is relatively horizontal.

⑩ Place for placing materials during installation work; Same conditions as above and adjacent to the resettlement site.

5、 Provide documents

·Provide 1 copy of the quality certificate upon acceptance and handover

·Provide 1 copy of the user manual during acceptance and handover

·Provide 1 copy of the technical specification document during project negotiation