RF admittance level switch

Overview
SYC-UYK RF admittance level switch is currently one of the most advanced level control instruments. It overcomes the false level signal caused by the adhesion of materials to the capacitive level switch, so it can control the real level while eliminating the false level signal adhered and suspended around the probe.

technical indicators

1. Power supply: 220VAC/50HZ;
2. Output contact capacity: DPDT, 10A/220V AC;
3. Delay: adjustable from 0 to 30 seconds;
4. 物料温度：-150~+240 ℃；
5. Sensitivity: less than 1PF;
6. Power loss protection switch: High low switch is used, and the field can be adjusted.

Probe selection

1. Short probe: L=100mm (suitable for small silos and situations with insufficient space).
2. Standard probe: L=300mm (suitable for measuring the level of food and medicine in storage tank processing machinery and funnels).
3. Fly ash probe: L=460mm (suitable for measuring fly ash, coal ash, etc.).

Recommended Installation Selection

1. When measuring non-conductive media, it can be installed horizontally and vertically, but vertical installation requires a probe length of 400mm or longer
2. It can be installed horizontally or vertically when measuring conductive liquids, slurries, or interfaces.
3. When measuring powder and granular materials, it is better to install them horizontally, but the probe protective cover should be extended 60-80 degrees beyond the thickness of the accumulated material on the container.