RM-10000 online TDS/conductivity meter 2-in-1 monitoring instrument

Kind reminder: Choose the appropriate electrode and installation method according to the environment. L? You can apply for our company's existing online collection software for the upper computer for free, and other functional software needs to be ordered. 1. Please confirm the product configuration and whether the packaging box of the detector you purchased is complete. If there is any packaging damage or shortage of any accessories, please contact the person in charge as soon as possible. The configuration is as follows:

Kind Reminder

lSelect appropriate electrodes and installation methods based on the environment.

lYou can apply for our company's existing online collection software for the upper computer for free, while other functional software needs to be ordered.

1. Product configuration

Please confirm that the packaging box of the detector you purchased is * * * intact. If there is any packaging damage or shortage of any accessories, please contact the responsible person as soon as possible. The configuration is as follows.

Standard Configuration

◇ One instrument

◇ Tighten two locking strips

◇ One user manual

Optional Accessories

◇ Electrode installation bracket

◇ Electrode flow cup

◇ Constant 0.01 electrode; 0.1 electrode; 1.0 Electrode; 10 electrodes.

◇ AC 220V power cord

2. Product Introduction

Key Features:

◇ New waterproof, dustproof, and moisture-proof high-quality shell (IP65) technology, surface painting technology, elegant and high-end appearance of the instrument.

The product has * * *, high stability performance, and strong anti-interference ability.

◇ Large screen dot matrix LCD display, supports switching between Chinese and English menus, and displays multiple parameters simultaneously.

◇ It can measure conductivity/TDS, control upper and lower limits, and automatically switch ranges to improve the measurement resolution of the product.

◇ The screen displays the alarm status and can be accompanied by ON/OFF signal output at the same time.

◇Automatic temperature compensation function:Automatic 0-100 ℃.

Communication function: Both RS485 and 4-20mA interfaces use optoelectronic isolation technology. The RS-485 communication interface is compatible with the MODBUS protocol (optional) and can be converted to RS-232. The conductivity/TDS value corresponding to the 4-20 mA current output can be set arbitrarily. Support internal IoT and customized IoT for customers.

◇ Function of setting hysteresis arbitrarily to avoid frequent operation of switch relays.

◇ Can be customized in large quantities (0-300 mS · cm)^-1Within)

◇Watchdog function: Ensure that the instrument panel does not crash.

◇Factory settings can be restored. Power failure protection>10 years.

3. Technical indicators

◇Conductivity measurement range:

0.01 electrode 0-20.00 μ S · cm^-1

0.1 electrode 0-200.0 μ S · cm^-1

1.0 Electrode 0-2000 μ S · cm^-1

10.0 electrode 0-20.00 mS · cm^-1 (Customized for other ranges, such as 0-300 mS · cm)^-1）

◇ TDS range:

0.01 electrode 0-10ppm

0.1 electrode 0-100pm

1.0 Electrode 0-1000ppm

10.0 electrode 0-10000ppm (customized for other ranges)

◇Resolution:0.01μS·cm^-1,0.1μS·cm^-1，0.001 mS·cm^-1，0.01 mS·cm^-1

Accuracy: 2.0% (FS)

◇ Automatic temperature compensation: 0-100 ℃ Temperature compensation: NTC10k, based on 25 ℃, temperature compensation coefficient can be adjusted

◇Control interface: Two sets of ON/OFF relay contacts (passive ports), divided into conductivity/TDS, temperature control signal photoelectric isolation output

◇Automatic cleaning interface: a set of automatic cleaning control points, cleaning time 0-9999 seconds, interval time 0-9999 minutes

4-20mA current output: One current output, photoelectric isolation protection, improves anti-interference ability

◇ 485 interface: Optoelectronic isolation output, supports IoT, (partially compatible with MODBUS protocol)

◇ Relay: Relay hysteresis can be set arbitrarily, relay load 3A 220VAC

◇ Working conditions: The ambient temperature is between 0-60 ℃Relative humidity≤90%

◇Output load: Load＜750Ω（4-20mA）

◇ Working voltage: 220VAC ± 10%, 50/60Hz

◇Size: 96 × 96 × 168 mm

◇Hole size: 92 × 92mm

◇Weight: 0.9Kg

◇Protection level: IP65