RSF 58 P Series Encoder - ReSatron, Germany

RSF 58 P Series Encoder - ReSatron, Germany

Introduction to RSF 58 P EncoderRSF 58 P is a Profibus DP protocol absolute multi turn encoder produced by ReSatron in Germany. The model, various parts, and extended parameters correspond to key attributes such as product series, mechanical specifications, communication protocol, resolution, installation method, etc. It needs to be comprehensively interpreted in conjunction with coding rules and technical parameter tables. 1、 Basic Model Core Meaning - RSF: Brand exclusive product series identifier, representing the core product line of this type of encoder under ReSatron. -58: The outer diameter specification of the product corresponds to a diameter of 58mm for the encoder housing, which is a key distinguishing parameter for mechanical dimensions. -P: Communication protocol identification, specifying that the encoder supports Profibus DP protocol and is compatible with Device Class 1 and 2 device types. 2、 Extended parameter encoding rules (corresponding to model suffix/selection parameters)

1. Resolution encoding (core performance parameter) -10: Single cycle resolution of 10 bits, corresponding to 1024 S/T (steps per revolution), measured only for a single cycle (1 T). -13: Single cycle resolution of 13 bits, corresponding to 8192 S/T, only for single cycle (1 T) measurement. -26: Multi cycle total resolution of 26 bits, consisting of 1024 S/T (single cycle) x 65536 T (multi cycle). -29: Multi cycle total resolution of 29 bits, consisting of 8192 S/T (single cycle) x 65536 T (multi cycle). 2. Voltage specification code -3: The supply voltage range is 10-30 VDC, matching common power standards in industrial scenarios. 3. Encoding Format Encoding - B: The output encoding format is binary, and data transmission follows binary rules. 4. Flange and shaft diameter coding - W1: 10mm shaft diameter+clamping flange, corresponding to the "10mm shaft clamping flange" in mechanical installation dimensions. - V6: 6mm shaft diameter+servo flange, corresponding to the "6mm shaft servo flange", suitable for different installation scenarios. 5. Output and Option Encoding - DS: Bus cover sideways movement out design, optimizing installation and maintenance convenience. -F1: Optional incremental track configuration, including 2 channels of 1024 S/U incremental signal output. -F2: Optional incremental track configuration, including 2 channels of 2048 S/U incremental signal output.

ReSatron GmbH Company Introduction

Core Business and Products

1. Main product categories

• rotary encoderAs the core product line, it covers multiple series such as absolute, incremental, and bus protocol types.

• Absolute encoders: such as the RE300 series (with a resolution of 16 bits, used for machine tool spindle positioning. In the case, a precision machine tool factory in Germany used this series to ensure machining accuracy of ± 0.001mm), and the RSF 58 P series (supporting Profibus DP protocol, absolute multi turn encoder, with a maximum single turn resolution of 13 bits and a maximum multi turn resolution of 29 bits, with parameterized operation mode and self diagnostic function).

• Incremental encoders: such as the RI200 series (with a response frequency of 100kHz, suitable for high-speed motors, and used in Japanese industrial robots for precise joint motion control), ES10 series, ZK58 series, etc. Some products support external monitoring functions.

• Bus protocol encoder: covering multiple industrial bus standards, such as Profibus (MS58P series, MS58GP series, etc.), CAN (MS58C series, etc.), CANOPEN (MS58CO series, etc.), INTERBUS (MS58I series, etc.), DEVICENET (MS58D series, etc.), suitable for complex industrial bus systems.

• inclination sensorIncluding two major directions: high-precision and micro. High precision inclinometers such as the LS100 series (measuring range ± 60 °, accuracy 0.01 °, used for unmanned aerial vehicle attitude monitoring, used by a Chinese drone manufacturer to improve aerial stability); Micro tilt sensors such as the LS50 series.

• Linear displacement sensorRepresented by magnetostrictive displacement sensors, such as the MLS series (range 0-5000mm, used for hydraulic cylinder position detection, Swedish hydraulic equipment manufacturers use this series to optimize excavator boom motion control), it meets the requirements of linear measurement scenarios.

• Special and customized productsWe provide heavy industry specific encoders (such as EA10S series, EM10S series, etc.) that can be adapted to heating and cooling systems, withstand harsh working environments, have seismic performance of up to 200G, and use high-quality materials (such as V4A 1.4571); At the same time, it supports customized development and can design special shafts (such as tenons and grooves that comply with DIN 6885), flange accessories, and mechanical parts according to user specifications. Some functions can be implemented through software to meet personalized application needs.

2. Core advantages of the product

• High precision and high reliabilityThe product resolution and measurement accuracy are industry-leading, with some encoders achieving an accuracy of 0.025 ° (at 400kHz) and tilt sensors achieving an accuracy of 0.01 °; Each product undergoes individual testing (rather than serial testing) before leaving the factory to ensure stable quality, and some products are equipped with self-monitoring devices that can monitor code consistency, signal frequency, LED status, etc. in real time, making it easy to quickly locate faults.

• Strong environmental adaptabilityDevelop specialized products for harsh working conditions, supporting temperature control systems such as heating, water cooling, and air cooling. The protection level can reach up to IP65 (such as RSF 58 P series), with resistance to vibration (in accordance with DIN EN 60068-2-6 standard) and impact (up to 200G). The working temperature range covers -20~+85 ℃, and is suitable for heavy industries such as steel, lifting, petroleum, and chemical.