Remote CNC water bath oscillator

NegotiableUpdate on 12/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The GD-88T remote CNC water bath oscillator can remotely control the oscillation state and temperature control on a mobile phone, achieving automatic control and operation, and multi-stage programmable control. It is a constant temperature oscillation water bath designed according to the needs of modern biotechnology development. The equipment adopts a brushless DC motor, a mechanical and electrical integrated structure, and a suspension buffer anti shake design. It is a high-quality water bath constant temperature oscillator and a laboratory equipment for precision cultivation preparation.

Product Details

GD-88TRemote CNC water bath oscillatorConfiguration requirements:

1. Equipped with RS232 communication (convertible to RS485) port and wireless communication function, managers can monitor the temperature and oscillation status of the oscillator in the office;

2. Mirror SUS304 stainless steel inner groove and bath cover, not easy to rust, corrosion-resistant, easy to clean and disinfect; Stainless steel heating tube, corrosion-resistant;

3. Low liquid level anti dry burning and power-off protection function;

4. Fault cause self check and prompt function, the device can automatically detect its own faults and display the cause of the fault;

5. Maintain an in vitro digestion (gas production) temperature above 90 ℃ for at least 24 hours;

6. If the temperature exceeds 105 ℃, an automatic alarm will sound and the power will be cut off;

7. Equipped with a hidden pull-out drain valve for easy liquid discharge operation.

8. Adopting a brushless DC motor to directly drive the shaker, with low linearity and noise.

9. Self diagnostic function (heater circuit breaker, sensor abnormality, upper and lower temperature alarm).

GD-88TRemote CNC water bath oscillatorTechnical Specifications:

1. Reciprocating frequency: 40-200rpm/min

2. Frequency accuracy: ± 1rpm

3. Oscillation amplitude: 20 (mm)

4. Inner container size: 50x30x20 (W × Lx D cm)

5. Fixture type: Stainless steel spring fixture

6. Oscillation mode: reciprocating oscillation (standard)

7. Number of rocking plates: 1 piece

8. Timing range: 0-9999min

9. Temperature control range: ambient temperature RT ℃ -99.9 ℃

10. Temperature resolution: 0.1 ℃

11. Power: 2000W

12. Voltage: AC 200-240V 50-60HZ

GD-88T remote CNC control technology is mature, of excellent quality, and trustworthy. Managers can implement monitoring of oscillator temperature and oscillation status in the office; It can simplify complex experimental processes and achieve multi-stage automatic control and operation. It can preset dozens of oscillation speeds, working times, and a programmable constant temperature state, and has the characteristic of low noise operation.

Changzhou Gaode Instrument Manufacturing Co., Ltd. is a professional laboratory equipment manufacturer and a technology-based enterprise that integrates design, production, sales, and service. Strive to achieve perfection and serve people from all walks of life wholeheartedly throughout the entire process. Thank you for your attention! Welcome to further.