In 2018, Mr. Wang from Chongqing purchased 30 conveyors from our factory

Forging conveyor Hot forging conveyor belt Precautions for the conveyor belt of red hot metal round steel square steel metal parts：

If the conveyor is a hoist or a sloping conveyor, it should be lifted with an angle during transportation. It is recommended to add horizontal baffles and anti slip partitions on the conveyor belt as much as possible.

2. If the inclined lifting conveying method is used to transport round balls or round steel, it is necessary not to use a silent toothed chain conveyor. The conveying surface of the silent toothed chain conveyor and the silent toothed chain conveyor is smooth, and the conveyed object will slide down, making it impossible to lift and transport.

The best solution for conveying hot forged parts with slopes is to use chain plate conveyors, chain rod conveyors, followed by precision roller chain conveyors. Silent toothed chain belts or silent toothed chain conveyors should not be used.

4. When customers order forging conveyors, they must inform the supplier that they are transporting round steel, circular rings, or steel balls. If these are circular cylinders or spheres, the supplier will pay attention to adding horizontal baffles and anti slip isolation baffles when designing the conveyor belt.

5. If the hot forged parts are too large or heavy, it is recommended not to use roller chain conveyors. Roller chains are heat-treated, and if the red hot metal parts are left on the chain for a long time, it will anneal the chain and cause a decrease in its service life.

Contact: Manager Fang