Rubber Shore Hardness Tester LX-A. Suitable for Leather, Wax, and Polyfats

NegotiableUpdate on 05/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The rubber Shore hardness tester LX-A is an A-type pointer Shore rubber hardness tester. The LX-A rubber Shore hardness tester is suitable for measuring the hardness values of low to medium hardness materials and is widely used in fields such as rubber, synthetic rubber, soft rubber, polyester, leather, wax, etc. The end pressure of the indenter is 0.55N-8.06N. In addition, the LX-A rubber Shore hardness tester can be used on a separate hardness testing platform to reduce manual operation pressure and have better measurement stability.

Product Details

Applicable standards for rubber Shore hardness tester LX-A

The LX-A rubber Shore hardness tester follows the standards DiN 53505, ASTM D2240, ISO/R868, and JIS R7215.

LX-A Usage LX-A

1Place the sample on a sturdy surface and grip itLX-A Rubber Shore Hardness TesterThe distance between the pressure needle and the edge of the sample should be at least 12mm;

2. Press the pressure foot steadily onto the specimen, ensuring that the pressure needle is pressed vertically into the specimen until the pressure foot is in complete contact with the specimen and the reading is taken within 1 second;

3. Measure the hardness value 5 times at different positions at least 6mm apart from the measuring points, and take the average value (the measuring points of microporous materials are at least 15mm apart);

4. To stabilize testing conditions and improve testing accuracy, it is necessary toRubber Shore Hardness TesterThe device is tested on the same model test stand produced in conjunction with it.

Rubber Shore Hardness Tester LX-ASpecs

model	LX-A
Dial value	0-100 degrees
Needle stroke	0-2.5mm
Pressure at the end of the pressure needle	0.55N-8.06N

Rubber Shore Hardness Tester LX-A

Shore rubber hardness tester