Salt spray machine 90

Salt spray machine 90

With the continuous improvement of product quality, Weihuang Equipment's requirements for environmental testing equipment are also constantly increasing. Faced with increasingly severe market demand, Dongguan Weihuang Testing Equipment Co., Ltd. has risen to the challenge and fully launched the W-CS series of corrosion salt spray test box products. Now we would like to introduce the W-CS60 salt spray test box, which is an environmental testing instrument that mainly uses artificial simulation of salt spray environmental conditions to assess the corrosion resistance of products or metal materials. Can adapt well to salt spray corrosion of various intensities in all directions The artificial simulation of salt spray environment test is to use a salt spray corrosion test chamber to artificially create a salt spray environment in its volume space to assess the corrosion resistance and quality of the product. Compared with the natural environment, the chloride salt concentration in its salt spray environment can be several times or tens of times higher than the salt spray content in general natural environments, greatly increasing the corrosion rate. The time required to obtain the results of salt spray testing on products is also greatly shortened. If a product sample is tested under natural exposure conditions, it may take up to 1 year for it to corrode, while testing under artificial simulated salt spray conditions only takes 24 hours to obtain similar results. While actively adapting to the environmental testing equipment market, Weihuang Equipment is also striving to strengthen its own structure. So far, it has various testing chamber testing machines, including salt spray testing chamber series, salt spray testing machine series, constant temperature and humidity testing chamber series, constant temperature and humidity testing machine series, etc., which are widely used in aerospace, aviation, shipbuilding, hardware and electronics, electrical appliances, chemical industry, postal and telecommunications, automobile and motorcycle, quality inspection of industrial and mining enterprises and other departments and industries.

Weihuang Equipment has also launched other corrosion salt spray test chambers of the same series but different types: W-CS60, W-CS90, W-CS120, W-CS160, W-VS200. We can customize various non-standard salt spray test chambers according to customer requirements. The whole machine is made of imported PVC board, with a three-dimensional reinforcement technology of ring belts inside. The structure is strong, never deformed, and resistant to acid and alkali, high temperature, and aging. It is suitable for various testing specifications such as salt spray and copper acetate; The control devices are all easy to operate on the same panel and are clear at a glance; Adopting an automatic/manual water addition system, it has the function of automatically replenishing the water level when the water level is insufficient. The test is not interrupted, and the warning of insufficient water level ensures safe use; The precision glass nozzle (PYREX) is made of special glass, and the mist spreads evenly and naturally falls on the test piece. It can be used continuously for 4000 hours without crystal salt blockage; Equipped with dual over temperature protection function, warning display in case of over temperature, and cutting off the power supply of the heater to ensure safe use; The imported temperature controller uses digital display and PID control, with an error of ± 0.1 ℃; The laboratory adopts steam direct heating method, with fast and uniform heating speed, reducing standby time. The heating tube is made of highly corrosion-resistant titanium tube; The spray tower is equipped with a conical disperser, which has the functions of guiding fog, adjusting fog volume and even falling fog volume; The saturated air tank adopts the Henry's law to heat and humidify, and provide the required humidity for the laboratory; Equipped with an automatic defogging device, it can clearly observe the test samples in the laboratory; Mist sealed water tank, using water sealing method to prevent mist leakage; The material of the laboratory sealing cover is A-grade acrylic impact resistant board imported from Europe, which is easy to operate, safe and reliable; The imported timer adopts digital display, accurate timing, and can be set in segments of H. minutes, M. seconds, and S. Any desired test time can be adjusted from 0.01 seconds to 9999 hours; The laboratory basket frame adopts a flat indexing frame, which can adjust the angle freely. The direction of falling and receiving fog on all sides is completely consistent, and there are many test pieces placed.

W-VS90 Salt Spray Test Chamber Laboratory Size: 900 × 600 × 500 (L × W × H) mm

External dimensions: 1410 × 880 × 1280 (L × W × H) mm

Laboratory volume: 270L

Salt water tank capacity: 15L

Relative humidity in the laboratory: above 85%

Spray mode: continuous spray