Self compacting concrete double horizontal shaft forced mixer (60 liter specialized)

Do you have stock available	yes	Certification	Measurable
Brand:	Wuhan Zhengyang Chengze Instrument Co., Ltd	Scope of application:	blender
Classification:	blender	Category:	blender
Model:	HJS-60	Specifications:	60 liters
Trademark:	Wuhan Zhengyang Chengze Instrument Co., Ltd	Packing:	wooden box
Output	10000

The HJS60L self compacting concrete double horizontal shaft mixer has been included in the national industry mandatory standard - "Concrete Testing Mixer" (JG), and its product performance meets or exceeds the standard requirements. Due to its scientifically reasonable design, strict quality control, and unique structural form, the double horizontal shaft mixer has the characteristics of high mixing efficiency, more uniform mixture, and cleaner discharge. This product is suitable for building materials or concrete testing laboratories in research institutes, mixing plants, testing units, and other institutions. The main feature of the self compacting concrete double horizontal axis mixer is the new generation mixer produced according to the latest national standards. During use, the surface of all aggregate particles is wrapped in cement slurry, so that the components of the concrete are mixed into a uniform mixture. After mixing evenly, the color of the concrete is consistent. The relative error of the mortar bulk density in different parts of the concrete mixture in the same tank is less than 1.0%, and the relative error of the coarse aggregate weight per unit volume of concrete mixture is not more than 5%. It has high technical performance such as low noise, reducing the height of the feeding port from the ground, increasing the cumulative fault free working time to 300 hours, and improving the reliability of the mixer. It is an essential equipment for self compacting concrete testing. Main technical parameters of concrete double horizontal shaft mixer: 1. Model HJS-60 2. Maximum discharge capacity: 60 liters 3. Mixing time: ≤ 30 seconds 4. Mixing speed: 47 revolutions per minute 5. Motor power: 4 kilowatts 6. Power supply voltage: 380V7. Net weight of product: 400 kilograms 8. Empty load operation noise ≤ 65dB (A) ≥ 9. Cylinder wall thickness ≥ 8mm Operating procedures 1. Before use, check the power supply, press the switch first, and then close the knife switch to check whether the operation is flexible. Are the vibrators, rollers, and feeding rods operating normally. The winding condition of the steel wire rope on the drum; Is the lifting and lowering of the gangue platform normal. If any malfunction is found, notify the mechanical and electrical team to handle it. After processing, it can be used. 2. Do not feed too much at once, feed according to the ratio, and pay attention to the water cement ratio. The mixing shall be even, and the mixing time shall not be less than one minute at a time. The normally mixed concrete shall be very thick Congee. 3. A designated person should be assigned to turn on the device, and the driver should be familiar with the working principles of each operating system. If any faults are found, the device should be stopped immediately for inspection. 4. Electrical appliances should be taken care of, and cables should be protected to prevent damage. 5. The mixer should be leveled, and no one should stand under the mixer funnel to prevent injury when flowers and water fall under the funnel. 6. When temporarily stopping the track, the mixer should be started regularly (every twenty minutes) to prevent the concrete from solidifying or pouring out the concrete in the drum, and the drum should be washed clean with water. 7. After the concrete pouring is completed and the machine is stopped, the drum and the mortar outside the machine should be washed and cleaned with water in a timely manner. Clean the feeding hopper once a shift to ensure that the material falls into the designated position as specified by the party, and apply a layer of oil on the surface for future use. 8. Seriously implement the shift handover system and clearly explain the operation status and precautions of the work machines The equipment configuration table of the self compacting concrete testing laboratory follows the standard "Technical Specification for Application of Self compacting Concrete" JGJ/T, the self compacting concrete slump expansion tester 2, the self compacting concrete J-ring flow barrier height difference meter (J-ring flow meter) 3, the self compacting concrete L-shaped meter 4, the self compacting concrete V-shaped meter (V-box) 5, the self compacting concrete U-shaped meter (U-shaped box: A-type European standard, B-type Japanese standard) Yuan 6, Orimet flow velocity measuring instrument 7, self compacting concrete mixture stability testing cylinder (jumping table test method 8, self compacting concrete total amount detection instrument 9, self compacting concrete settlement tendency testing cylinder 10, self compacting concrete pressure and water release test instrument 11, self compacting concrete elastic modulus measuring instrument 12, self compacting concrete blade constrained early cracking test equipment (mold) 13, self compacting concrete flat plate constrained early cracking test mold 14, self compacting concrete static anti segregation performance test column mold 15, self compacting concrete sample collection plate 16, self compacting concrete double horizontal axis forced mixer (60 liter special) 17, self compacting concrete compressive and flexural strength testing machine 18, self compacting concrete filling box (K-type box) 19. Vertical expansion rate tester for self compacting concrete 20. GTM sieve stability test