-
E-mail
2811722260@qq.com
-
Phone
18017731198,15201940480
-
Address
Room 520, Jiazheng International Building, No. 28 Moyu Road, Jiading District, Shanghai
Product Categories
- YJL-080 Intelligent Vortex Flow Meter
- YJ-BP diffusion silicon pressure transmitter
- YJ-XDFD/Q series intelligent handheld device
- YJ-G-L/H/T/S single flange transmitter
- YJ-G-M double flange differential pressure transmitter
- YJ-G-DR/DP/GP single crystal transmitter
- YJ-SG series intelligent isolator
- YJ-SPD series intelligent distribution device
- YJ-XJ-7000 Color Screen Paperless Recorder
- YJ series instrument valves, fittings, and accessories
- YJ series instrument insulation protection box
- YJ series automation dashboard (cabinet)
Shanghai Yujie Automation Engineering Instrument Co., Ltd
Series single flange transmitter
NegotiableUpdate on 12/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Overview: YJ-G-L/H/T/S single flange differential pressure/pressure transmitter is used to measure media containing solids, precipitated liquids, and steam. Its membrane box is used to prevent the medium from directly entering the pressure sensor component of the differential pressure transmitter, causing inaccurate measurement of the transmitter or direct damage to the sensor. It uses filling liquid such as silicone oil to transmit pressure between it and the transmitter. Oil and other filling fluids transmit pressure. YJ-G-L/H/T/S single flange differential pressure/pressure transmitter is used to measure the liquid level of liquids, gases, or vapors. Density, pressure, and flow rate, then convert them into 4~20mADC HA
Product Details
Overview
YJ-G-L/H/T/S single flange differential pressure/pressure transmitter is used to measure the presence of
Solid and precipitating liquids, as well as steam and other media. Its membrane box is used to prevent media
Directly entering the pressure sensor component of the differential pressure transmitter, causing the transmitter to measure
Inaccurate measurement or direct damage to the sensor, using silicon between it and the transmitter
Oil and other filling fluids transmit pressure.
YJ-G-L/H/T/S single flange differential pressure/pressure transmitter for measuring liquids
The liquid level of a body, gas, or vapor. Density, pressure, and flow rate, and then
It is converted into a 4-20mADC HART current signal output. Can be used with HART hand
Operators communicate with each other Set up. Monitoring, etc.
Technical Specifications
Measurement parameter: differential pressure Liquid level pressure
Measurement range: Lower limit value: Starting from -100% URL (continuously adjustable)
Upper limit value: up to+100% UFL (continuously adjustable by 1)
range
Table 1 Comparison Table of Range Code and Range Range Relationship
Minimum range and maximum range of normal range
Rated pressure (maximum value)
code
B
1Pa
6kPa
4xPa '
40kPa
2KPa 250kPa
Rated pressure of flange
200kPa 700kPa
Table 2 Comparison Table of Flange and Minimum Range Relationship
Liquid level flange
Nominal diameter
minimum range
DN 50/2 surface
10kPa
flat
DNBO/3.
2kPa
DN41
2kPa
DN50/2 1
16kPa
plug-in
DN80/31
2kPa
DN4
2kPa
The minimum range of the differential pressure transmitter should be the minimum range in Table 1 and Table 2
The larger value. The range of adjustment shall not be less than the minimum range. Maximum quantity of transmitter
Cheng should be the minimum value between the maximum range of the transmitter body and the rated pressure of the flange.
lose
go out
Output signal
2-wire system. 4-20mADC HART output, digital communication. HART protocol
Load on 4-20mADC signal. Output signal limit: lmin=3.8rmA,
B Beauty
Imax- 20.5mA
Alarm current (mode can be set)
Low alarm mode (minimum): 3.6mA High alarm mode (maximum 1.21mA)
Do not report mode (maintain); Maintain the effective current value before the fault
Alarm current standard setting: high alarm mode
Similar Product Recommend