Shanghai Shuoguang multifunctional mixer

1Shanghai Shuoguang multifunctional mixerProduct Introduction

SG-5403The multifunctional mixer integrates multiple functions such as magnetic heating mixer, constant temperature magnetic heating mixer, electric mixer, etc（Or constant temperature magnetic heating）Mixing and electric mixing can be carried out on the same machine,It can accurately and stably stir liquid solutions within a wide speed range.Performance that can meet your diverse needs in different work environments.easy to operate,Smooth operation,stepless speed regulation,Temperature control standard,Specially suitable for the same machine test stirring operation of small volume solutions with different viscosities,It is a tool for petroleum, chemical, metallurgical, textile, food, medical and health, environmental protection, biochemical laboratories, analysis rooms, education and scientific research.

Shanghai Shuoguang multifunctional mixerTechnical parameters:

Working power supply: 220V50HZ
Whole machine power:300W
Temperature Control Range:room temperature~100°CDigital display temperature control

precision:±1°C
Magnetic stirring speed range:start~1400r/min;
Electric mixing speed range:start~3000 r/min
Work surface:120MM
External dimensions:37*26*57CM

Mixing capacity:1000ML
2、 Usage method

Connect the external power supply,Turn on the power switch,Indicator light on.Test bottle containing solution and stirrer（Or other vessels）Place it on the work panel,Turn on the magnetic stirring switch,The corresponding indicator light is on,Adjust the 'magnetic' speed control knob,Raise the required speed. It can be used for magnetic stirring. If electric stirring is required, please confirm the test bottle first（Or other vessels）The clamping position,Adjust and calibrate the position and height of the motor and fixture on the column,Turn on the electric mixing switch,The corresponding indicator light is on,Adjust the 'electric' speed control knob,Raise the required speed to start electric stirring,When constant temperature stirring is required,Turn the measurement switch to the setting end,When the temperature set by rotating the selection knob is higher than the actual temperature,The green light indicates that the heating has started working,When the green light goes out and the red light is on, it indicates that it is in a constant temperature state.Work done,Set the speed control knob to the 0 scale position;Place the temperature control knob in a non working state,Turn off the mixing switch and power switch,Cut off the power supply.Wipe the columns, work surfaces, fixtures, and sensors clean,No residual water droplets or dirt are allowed on it.

Ordering information: