Shanghai Yichuan Instrument XMTE-2002M Digital Display Dial Set Temperature Regulator

NegotiableUpdate on 12/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Shanghai Yichuan Instrument XMTE-2002M digital display dial setting temperature regulator can be widely used in industries such as metallurgy, textiles, plastic machines, incubators, ovens, refrigeration, chemical and medical industries for temperature measurement and automatic control within the range of -200 to 1800 ℃.

Product Details

Shanghai Yichuan Instrument XMTE-2002M Digital Display Dial Set Temperature RegulatorCharacteristics:

01. Display method: Directly display the measured value with numbers;

02. Display error: less than ± 0.5% ± 1 word; Less than ± 1.0% ± 1 second grade;

03. Setpoint deviation: less than ± 1.0 words (numerical display of set value); Setpoint error: less than ± 1% (set by encoding switch);

04. Control point insensitive area: less than 0.5%;

05. Cold end compensation: The error within 0 ℃ to 40 ℃ is less than 2 ℃;

06. Time proportion adjustment: (1) proportion band 4% ± 1% (2) cycle 40s ± 10s;

07. P.I.D regulation: (1) Output 0-10mA or 4-20mA (2) Load of approximately 800 jiao?? Proportional band) about 4% (4) I (integration time) about 4 minutes (5) D (differentiation time) about 30 seconds;

08. Output pulse signal; Phase shifted pulses or zero crossing trigger pulses with an amplitude greater than 3V and a width greater than 40us;

09. Output contact capacity: AC 250V3A (resistive load);

When used with a deviation of 20 ℃± 2 ℃ within the range of 0 ℃ -50 ℃, the temperature coefficient is less than 0.05%/℃;

11. Working power supply: 220V ± 10% 50Hz; Function 5w;

12. Working environment: Temperature range of 0-50 ℃;

13. Measurement range: See the table below (the recommended measurement range is shown below, other ranges are acceptable).

Shanghai Yichuan InstrumentXMTE-2002M digital display dial setting temperature regulatorParameters of:

Specific models	pattern	Display and setting methods	adjustment method	input signal	Setting of potential
XM	Z: Digital display T: Digital display regulator (Note: The external dimensions are 160 × 80mm)	1: Set adjustment	0: Two position adjustment 2: Three position adjustment 3: Time ratio adjustment 6: Single phase phase-shift pulse regulation 7: Single phase zero crossing pulse regulation 8: Three phase zero crossing pulse regulation 9: Continuous PID regulation	1: Thermocouple 2: Thermal resistance 3: Hall transmitter or CP type differential pressure gauge (mV) 4. Remote transmission of pressure gauge (Ω) 5: Standard current dynamic -10mA or 4-20mA	M dip switch setting

Specific models	pattern	Overall dimensions	Display and setting methods	adjustment method	alarm method	input signal	Unnoted
XM	Z: Digital display T: Digital display regulator	A:96×96mm DA:60×120mm D:72×72mm E:48×96mm G:48×48mm	2: Potentiometer setting 8: Dial switch setting, full range display (XMTDA)	0: Two position adjustment 2: Three position adjustment 3: Time ratio adjustment 6: Single phase phase-shift pulse regulation 7: Single phase zero crossing pulse regulation 8: Three phase zero crossing pulse regulation 9: Continuous PID regulation	0: Without alarm 1: With alarm	1: Thermocouple 2: Thermal resistance 3: Hall transmitter or CP type differential pressure gauge (mV) 4. Remote transmission of pressure gauge (Ω) 5: Standard current dynamic -10mA or 4-20mA	M dial switch setting not specified

Shanghai Yichuan Instrument XMTE-2002M Digital Display Dial Set Temperature Regulator

Input signals: thermocouple, thermistor

Accuracy: Level 0.5, 1.0

Adjustment rule: Two position or three position adjustment

Output: Can have alarm function

Contact capacity: AC220V 3A resistive

Power supply: AC110V, 220V 50/60HZ

Dimensions: 48 × 96 × 115mm

Hole size: 45+1 × 92+1