Shenyang LED Display Wholesale Manufacturer - Lianshuo Technology

NegotiableUpdate on 10/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Eight precautions for storing and installing LED display screens: 1. After cleaning the placement location of the box, lay it with pearl cotton

Product Details

LED displayEight precautions from storage to installation: 1. After cleaning the location where the box is placed, lay it with pearl cotton. 2. It is strictly prohibited to stack modules in a disorderly manner or stack more than 10 sheets. When stacking modules, place the lamp faces relative to each other and use pearl cotton for isolation. 3. It is recommended to place the box with the lights facing up and flat. If there are too many items that need to be placed upright, special attention should be paid to protection. It is forbidden to place them upright in places with high vibration. 4. The box should be handled gently, and when landing, the back should first touch the ground and then the lamp surface should touch the ground to prevent scratches. 5. All personnel should wear cordless anti-static wristbands during installation or maintenance. When installing boxes or modules, they should be handled gently and throwing is strictly prohibited. When transporting the box, it should be lifted and not pushed or dragged away on the ground to avoid damage to the bottom module caused by uneven ground. The box should maintain balance during the lifting process and should not swing or rotate left or right in the air. 7. When there are gaps or abnormal positioning during installation, it is strictly prohibited to use hard objects such as hammers to strike the box and module. You can pick up the box to remove foreign objects and try again. If adjustment is required, use a soft rubber hammer to strike the metal part of the box, and it is strictly prohibited to strike the module. It is strictly prohibited to engage in squeezing, collision, or other behaviors between modules. 8. If the unit board malfunctions, the corresponding board extractor should be used to remove the faulty module. It is strictly prohibited to use sharp objects such as screwdrivers or tweezers for unauthorized operations such as separation and prying.