Sherborne T935 series single axis tilt sensor

NegotiableUpdate on 11/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Single axis, gravity reference, output mode: voltage, angle range: 1 °, 14.5 °, 3 °, 30 °, 90 °, working temperature: -18~60 ℃, used for drilling surveying, structural health monitoring, railway maintenance equipment, etc.

Product Details

characteristic:

Effective range ± 1 ° to ± 90 °

Very sturdy, filled with liquid, capable of withstanding an impact of 1500g

Extended pins and chamfered edges of the casing for easy soldering

Laser marking of parts and serial numbers

Stackable for dual axis X and Y measurements.

Application:

Drilling mapping

Structural Health Monitoring

Alignment of continuous casting molds

Railway maintenance equipment

Mobile and fixed antenna aiming

Product Introduction

The Sherborne T935 series is a series of gravity reference servo inclinometers used for various industrial applications that require high-precision angle measurement, as well as rugged and space limited applications that encounter high vibrations and mechanical impacts up to 1500g.

The model has a range of+/-1 degree to+/-90 degrees, with low impedance output voltage signal, and can be stacked for dual axis operation. Electrical terminals are made by soldering pins.

Product Specifications
		±1°	±3°	±14.5°	±30°	±90°
Output standard	% FRO	±1
output impedance	Ω(max)	10
Output noise (DC to 10kHz)	V rms (max)	0.002
nonlinear	% FRO	0.08	0.05	0.02	0.02	0.05
non-repeatability	% FRO	0.02	0.01	0.002	0.001	0.0005
resolution	arc seconds	0.1	0.2	1.0	2.0	4.0
Frequency response range (-3 dB)	Hz	10	15	30	40	55
Sensitive axis is not aligned with the box	Deg（max）	±0.15	±0.15	±0.25	±0.50	±1.0
Horizontal axis sensitivity	% FRO(max)	0.2
Zero offset	Volts dc	±0.08	±0.04	±0.04	±0.02	±0.02
Hot zero shift	% FRO/°C(max)	±0.05	±0.03	±0.01	±0.005	±0.003
Thermal sensitivity offset	% Reading/°C	±0.05	±0.03	±0.01	±0.006	±0.006
electrical
Full range output (FRO)	Volts dc	±5
excitation voltage	Volts dc	±12 to ±18
operating current	mA(nom)	±15
Operating Temperature
Operating Temperature	℃	-18 to 60
Constant acceleration overload	G	50
impact		1500g, 0.5 ms,½ sine
Vibration durability		35g RMS,20 Hzto 2000 Hz sinusoidal
Protection level		IP65