Simulated transportation vibration table, automobile packaging transportation test vibration table

II Equipment Features:

1. Using digital instruments to display vibration speed, the speed can be adjusted according to demand;

2. The synchronous silent belt drive has low noise;

3. The sample clamping adopts a guide rail type, which is easy to operate and safe;

4. The machine base is made of heavy-duty channel steel with vibration damping rubber pads, which is easy to install and runs smoothly (if high-speed operation is required for long-term testing, it is recommended to install foot screws for fixation);

5. DC motor speed regulation, smooth operation, strong load capacity.

III Technical Specifications:

1. Maximum test load:100kg

2. Frequency range:100～300rpm

3. Amplitude range:1Inches（25.4mm）

4. Vibration mode: Rotary (commonly known as horse racing)

5. Simulated vehicle speed:25～40km/h

6. Workbench size:1200×1000mm

7. Guardrail height：80mm

8. Control motor: DC motor

9. Power supply voltage:AC380V 50Hz

10. Machine weight:According to actual weight

4 Standard Configuration

1. Tabletop:SUS#304stainless steel

2. Outer box part: Electrolytic board with external baking anti-static paint

3. Speed display:WOHUI YX-94

4. Communication relay: Omron from Japan

5. Fixture: Aluminum alloy

6. Motor: Taiwan Changyi

7. Chronograph:SAWATE DH48S

8. Transmission structure: aluminum alloy, synchronous belt, synchronous wheel matchingAType belt

Five experimenttest

This machine performs a series of controllable vibration simulations in experiments to test whether the product can withstand the test of transportation or vibration environmental factors during its life cycle, and to determine the requirements and standards for product design and functionality. According to statistical data, there has been an improvement3%The design level will increase20%Recycling and Reduction18%All unnecessary expenses.

1. Strength of the structure.

2. Loosening of the binding compound.

3. Protect the wear and tear of materials.

4. Damage to components.

5. Poor contact of electronic components.

6. Short circuit and intermittent instability in the circuit.

7. Deviation of standard values for each item.

8. Simulate the transportation vibration table to screen out defective parts in advance.

9. Identify the resonance relationship between parts, structures, packaging, and transportation processes, and improve their resonance factors.

10.The requirement for simulating transportation vibration test bench is to confirm the reliability of the product and screen out defective products in advance before leaving the factory, and evaluate their failure analysis in order to become a high-level and highly reliable product.