Single flange transmitter

NegotiableUpdate on 12/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The installation flange standard of JL-3851LT series single flange liquid level transmitter is in accordance with ANSI. The flange has 3 and 4 specifications, with flange grades of 150LB (2.5MPa) and 300LB (5.0MPa). The flange installation dimensions are shown in the following chart

Product Details

The installation flange standard of JL-3851LT series single flange liquid level transmitter is in accordance with ANSI. The flange has 3 "and 4" specifications, and the flange grades are 150LB (2.5MPa) and 300LB (5.0MPa). The flange installation dimensions are shown in the following chart. If the user adopts the GB9116-88 standard, please specify DN=80, 100, PN=2MPa.
★ Target audience; Liquid Gas and Steam
The materials for the liquid receiving membrane include 316L, Hastelloy C-276, Monel, tantalum, etc.
When not specified by the user, 3 "150LB flange and liquid receiving membrane material 316L shall be supplied.

、

● Differential pressure/pressure transmitter selection tableThe

JLE3851LT	pressure transmitter
	code	Range KPa
	2	0-0.125～1.5
	3	0-1.3～7.5
	4	0-6.2～37.4
	5	0-31.1～186.8
	6	0-117～690
	7	0-345～2068
	8	0-1170～6890
	9	0-3450～20680
	0	0-6890～41370
		code	output
		E	4-20mA
		S	intelligent
			code	Structural materials
				Flanges and fittings		Exhaust/Drain Valve	Isolation Diaphragm	Fill with liquid
			22	316 stainless steel		316 stainless steel	316 stainless steel	silicone oil
			23	316 stainless steel		316 stainless steel	Hastelloy C
			24	316 stainless steel		316 stainless steel	Monel
			25	316 stainless steel		316 stainless steel	tantalum
			33	Hastelloy C		Hastelloy C	Hastelloy C
			35	Hastelloy C		Hastelloy C	Tantalum
			44	Monel		Monel	Monel
				code	option
				M1	0-100% linear indicator table
				M3	3 and a half digit LCD display table
				M4	Smart meter display
				B1	Pipe bending bracket
				B2	Board mounted bending bracket
				B3	Pipe mounted flat bracket
				D1	The side relief valve is located at the upper part of the pressure chamber
				D2	The side relief valve is located at the lower part of the pressure chamber
				No note	1/2NPT taper pipe threaded joint
				C2	T-shaped threaded joint M20 × 1.5, with a ball cone connector welded with a rear end of a Ø 14 pressure pipe
				d	Explosion proof type d Ⅱ BT4
				i	Intrinsic safety type ia Ⅱ CT6
				s	Stainless steel three valve group

JL-3851GPType capacitive pressure transmitter (gauge pressure) measures minimum pressure1Kpa,(Can be transferred to a negative pressure transmitter).

Target audience: liquids, gases, and vapors

JL-3851GPtype	Pressure transmitter (including negative pressure)
	3	0-1~6KPa
	4	0-6~40KPa
	5	0-40~250KPa
	6	0-0.16~1MPa
	7	0-0.4~2.5MPa
	8	0-1.6~10 MPa
	9	0-4~25 MPa
	0	0-6~40 MPa
			code	output
			E	Non intelligent type（4~20mAOutput)
			S	Intelligent type（HARTAgreement)
				code	tieconstructmaterialmaterial
					Flange joint	exhaust/Drain valve	Isolation Diaphragm	Fill with liquid
				22	316stainless steel	316stainless steel	316stainless steel	silicone oil
				23	316stainless steel	316stainless steel	Hastelloy alloyc
				24	316stainless steel	316stainless steel	Monel
				25	316stainless steel	316stainless steel	tantalum
				33	Hastelloy alloyc	Hastelloy alloyc	Hastelloy alloyc
				35	Hastelloy alloyc	Hastelloy alloyc	tantalum
				44	Monel	Monel	Monel
					code	additional function
					M1	0~100%Linear indicator table
					M2	LEDDigital display table
					M3	LCDDigital display table
					B1	Pipe bending installation plate
					B2	Plate bending installation plate
					B3	Pipe installation safety installation board
					C0	1/2-14NPTCone tube internal thread joint
					C1	1/2-14NPTWelding of pressure pipe at the rear of the pressure joint with a diameter of Φ14
					C2	T-shaped threaded jointM20*1.5
					d	Explosion proof typed II BT4
					i	Intrinsically safe typeia II CT6

JL-3851GP	8		S	22	M1B1C1	Example of Selection