Split wall mounted explosion-proof air conditioner

　　Split explosion-proof wall mounted air conditionerSuitable for workshops, control rooms, laboratories, warehouses, and other places with explosive gas mixtures classified as IIA, IIB, IIC, and temperature groups T1-T4 in industries such as petroleum, chemical, metallurgical, military, and pharmaceutical. It is also used for room temperature control in places classified as Zone 1 and Zone 2 hazardous areas.

　　Product features:

1. Small size, can be installed and used in narrow spaces;

2. Flexible vortex compressor with high energy efficiency, low noise, and long service life;

3. Adopt composite explosion-proof type and complete measures such as overheating and pressure protection;

4. Use a remote control to directly control and display, making it easy to operate;

5. Adopting advanced microcomputer control technology, temperature and air volume can be adjusted

How to install split wall mounted explosion-proof air conditioner

The installation process of split wall mounted explosion-proof air conditioning requires high standards, multiple technical points, and high labor intensity. When installing a split wall mounted explosion-proof air conditioner, attention should be paid to the following ten steps. If any of these steps are not installed properly, it will affect the effectiveness and lifespan of the air conditioner.

1. Preparation before installation, checking the indoor and outdoor units can solve machine faults before installation;

2. The selection of installation location, the installation distance between indoor and outdoor units should be as close as possible, with a distance of no more than 5m and a maximum of 12m, which is conducive to the good circulation of refrigerant and refrigeration oil; The outdoor unit should be installed in a place with easy air circulation, avoiding heat sources, dust, etc;

3. The indoor unit is mounted on the wall. Before installation, the position of the mounting plate is determined based on the direction of the wall holes, and the reasonable connection between the through wall pipeline and the indoor unit is ensured;

4. The indoor and outdoor unit positions should maintain the appearance and firmness of the wall, and professional personnel should use a water drill to drill holes;

5. Fix the outdoor unit bracket, select the appropriate distance based on the measured distance and the corresponding hole spacing of the bracket, and tighten the expansion bolt to the wall without any looseness or sliding phenomenon;

6. The complete system composed of indoor and outdoor units of split wall mounted air conditioners is achieved by connecting pipelines and locking nuts, so it is important to pay attention to these issues;

7. The method of connecting the indoor unit is to remove the locking nut at the joint of the low-pressure air pipe and low-pressure liquid pipe of the indoor unit, align it with the center of the connecting pipe, tighten the locking nut until there is no air leakage, which is the best;

8. Check for gas leaks and conduct drainage tests. When picking up leaks, be patient and careful, and not make any mistakes;

9. Exclude indoor unit and pipeline air, failure to evacuate will affect the cooling effect;

10. Conduct a final check on all items and complete if there are no issues.

　　Split explosion-proof wall mounted air conditioner manufacturerTelephone:

Business ScopeSuzhou Xinlun Hua specializes in the research and development, production, and sales of explosion-proof electrical equipment such as explosion-proof air conditioners, explosion-proof dehumidifiers, and explosion-proof containers. We offer direct sales from manufacturers and support customization! Provide services such as installation and rectification of explosion-proof circuits, explosion-proof electrical testing and maintenance!
sales areaSurrounding cities such as Shanghai, Suzhou, Nanjing, Changzhou, Wuxi, Nantong, Jiaxing, Huzhou, and various parts of the country.