-
E-mail
zdnjsb@163.com
-
Phone
13905489280,13285488188,13853836621
-
Address
Xiazhang Town, Daiyue District, Tai'an City
Zhengda Brewing Equipment Factory, Daiyue District, Tai'an City
zdnjsb@163.com
13905489280,13285488188,13853836621
Xiazhang Town, Daiyue District, Tai'an City
Heating system for stainless steel wine cans:
In order to provide a better storage environment for Baijiu, there are some special requirements on temperature. Therefore, the heating system is required when stainless steel wine tanks are used. Here is a detailed introduction of the heating system of the equipment by Chia Tai Brewing Equipment Factory.
Firstly, stainless steel wine cans generally require certain temperature conditions for chemical reactions to occur, so the cans accept both pressure and temperature.
Secondly, when operating or preventing the use of high-pressure heating systems, other media can be used instead of water and steam, such as mineral oil, diphenyl ether mixtures (boiling point, molten salt, liquid lead, etc.). Therefore, a small space gap is formed between the resistance wire and the reactor body. The first three methods of obtaining high temperature all require the addition of a jacket on the reactor body, because the temperature change is significant, causing the jacket and shell of the reactor to undergo temperature changes and generate temperature difference pressure.
When choosing electric heating, the equipment is relatively simple and straightforward, the temperature is easy to schedule, and there is no need for facilities such as pumps, furnaces, chimneys, etc. The operation is also very simple, the risk is not high, the cost is low, but the operating cost is higher than other heating methods, and the heat power is below, so it is suitable for places where the heating temperature is below and the electricity price is low.
In the heating system of stainless steel wine tanks, chemical reactions are generally carried out. To ensure that the reaction can proceed uniformly and quickly and increase power, corresponding stirring equipment is usually installed in the reaction kettle, which brings about the problem of dynamic sealing of the transmission shaft and prevention of leakage
The above is an introduction to the heating system of stainless steel wine cans. We hope it will be helpful for our application, and we also need to regularly protect and maintain it.