Step in high and low temperature (humid and hot) aging room, non-standard customized step in constant temperature and humidity box

NegotiableUpdate on 03/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The walk-in constant temperature and humidity laboratory is an essential testing equipment for aviation, automotive, home appliances, scientific research, and other fields. It is used to test and determine the parameters and performance of electrical, electronic, and other products and materials after undergoing high temperature, low temperature, alternating humidity, or constant temperature tests. ...

Product Details

The walk-in constant temperature and humidity laboratory is an essential testing equipment for aviation, automotive, home appliances, scientific research, and other fields. It is used to test and determine the parameters and performance of electrical, electronic, and other products and materials after undergoing high temperature, low temperature, alternating humidity, or constant temperature tests.
Equipment parameters
volume(L)	YH-ZD-9m³			YH-ZD-12.9m³	YH-ZD -16.8m³	YH-ZD-27 m³	YH-ZD-35 m	YH-ZD- 43.3m³
*inner boxWHD*	*210210205*			*300210205*	*390210205*	*300210430*	*390210430*	*480210430*
*outer boxWHD*	The actual production size shall prevail.
temperature range	0~+85℃-20~+85℃-40~+85℃-60~+85℃ room temperature~85℃ humidity35%-98%（10%~98%R.H; 5%~98%R.HSelect conditions for special customization. ）
Wen/Humidity fluctuation Wen/Moisture uniformity Wen/Humidity deviation			±0.5℃/±2% ±0.1℃/±3% ≤±2℃/±3%RH
warm-up time Cooling time		About:3-4℃/divide About:1℃/divide(Special temperature rise and fall linear nonlinear requirements can be customized)
structural material		Inner box:SUS 304#8Kmirror finish outer box:High grade steel plate baked paint orSUS 304#stainless steel Insulation layer:PUfoaming+ultrafine glass wool
refrigeration system		French (Taikang) fully enclosed compressor unit, with heat dissipating fin evaporator also serving as a dehumidifier (Choose a water-cooled unit based on the specific situation of the high and low temperature test chamber)
heat Humidification system		Stainless steel finned heating tube air method, Humidification: Stainless steel sheathed electric steam generation method
safety protection		Compressor overcurrent, overpressure, oil pressure, no fuse overload protection, heating, humidification dry burning, box overheating, water tank water shortage alarm system.
Standard Configuration		Observation window, testing hole50CM/Barrier rack2Layer, over temperature protector, window observation light, time signal interface
Power（KW）		The walk-in constant temperature and humidity laboratory is determined based on the size of the model, temperature, and load conditions.
power supply		AC1￠3W220VorAC3￠5W380V50HZ
The detailed specifications shall be subject to the corresponding technical proposal (spare parts inventory for more than ten years)
execution standard 1TheGB/T10586-89Technical conditions for wet heat test chamber 2TheGB/T2423.1-2008Low temperature test chamber test method 3TheGB/T2423.2-2008High temperature test chamber test method 4TheGB/T2423.4-2008Alternating damp heat test method 5TheGB/T2423.22-2002Temperature change test method 6TheGJB150.9Damp Heat Test......

Step in high and low temperature (humid and hot) aging room, non-standard customized step in constant temperature and humidity box

View more videos