|
TESAMicro-Hite 3D， It is a small manual precision measuring device. The advantages of this measuring machine are that it is a measuring instrument with a very good performance price ratio among similar products, filling the gap between traditional precision measuring instruments and measuring machines. In this way, it has its own place in the field of precision measurement. This is a product truly produced and manufactured by Switzerland in Rennes, which can particularly meet the requirements of industrial production for high-performance measurement products.
The measurement accuracy of TESA's Micro Hite 3D can reach micrometers, and the operation is very simple, even if the operator is not familiar with the measurement operation. The measurement software REFLEX used by Micro Hite 3D has a user-friendly interface operation mode, and the operator can measure complex workpieces after using it for a few hours
Product advantages：
- Ability to adapt to various application environments
The main features of TESA Micro Hite 3D make it highly suitable for various application environments. The materials used have similar coefficients of thermal expansion, which can effectively reduce the influence of environmental conditions on measurement errors. - Lower cost of ownership, optimized performance price ratio
In addition, a good performance price ratio can significantly reduce the cost of ownership of this measuring machine, thereby enabling the system to be adopted by a large number of users. - The human-machine engineering interface and convenient Z-axis operation design
The design of Micro Hite 3D meets the requirements of ergonomics, and compared to other products, it is reasonably and economically priced. The structure adopts the ZMouse technology obtained, which can accelerate and facilitate the operation of the Z-axis. - Manufacturing process with exceptional stability
The manufacturing process also adopts a solution, such as optimized geometric stability when the axis moves. Each axis adopts frictionless air bearing and adopts precision triangular beam structure to ensure the integrity of the whole machine. - Equipped with Swiss TESA original probe
To ensure the high sensitivity and accuracy of TESA Micro Hite 3D, it can be equipped with developed TESA 3D probes: TESASTAR probes with adjustable trigger force or TESASTAR-i indexing probes
Travel range, size, and weight:
| specifications | Micro-Hite 454 | Micro-Hite 474 | | Travel range (x/y/z) | 460×510×420mm | 460×710×420mm | | machine weight | 300kg | 445kg | | Dimensions (L/W/H) | 970×930×1620mm | 970×1130×1660mm | | Dimensions of the tested workpiece (x/y/z) | 600×750×430mm | 600×990×430mm |
Display resolution: 0.001mm
Computer system resolution: 0.00001mm
Measurement speed: 760mm/s
Air pressure: 4.8 to 8.3 bar
Air flow rate: 21 liters per minute
Power supply: 115-230V.50-60HZ.0.3-0.7A Operating temperature range: 13 to 35 ℃
Technical features:
Newly acquired glass grating ruler.
The new X-direction guide rail adopts a precision triangular beam structure to ensure angular balance during movement.
New - User friendly control panel with powerful features.
Application Software - TESA REFLEX Application Software has a large number of customers and over 10 years of usage experience
Air bearings -22 air bearings ensure frictionless movement within the measurement space.
Probe - widely used Swiss made probes with binding requirements, with ruby diameter as small as 0.5mm
Diversity - TESA Micro Hite 3D can be equipped with a fine-tuning system. By adding a CCD imaging head, it can become a true non-contact measurement system.
|
