-
E-mail
qinsi@139.com
- Phone
-
Address
21st Floor, Building B, Huaqiangbei Metropolis 100, Futian District, Shenzhen, Guangdong Province, China
Product Categories
Shenzhen Futian District Metropolitan Electronic Market Qinsi Electronic Business Department
TM245P SMT machine
NegotiableUpdate on 02/25
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Summary of Basic Parameters for Detailed Information: The maximum mounting size is 370MM * 450MM (X * Y), and when feeding two rows, it is 370MM * 390MM (X * Y); The maximum number of mounting heads is 2, and the maximum number of tape stacking stacks is 50 (in the case of all 8MM tapes) (the left feeding slot will be made into a standard rear feeding slot optional). The maximum number of bulk IC stacking stacks is 10, and the number of full board ICs that can be placed is 1. The number of tube loading stacks is 4 (in the case of all SO8 tapes)
Product Details
detailed information
Summary of Basic Parameters
Maximum mounting size |
370MM*450MM(X*Y),370MM * 390MM (X * Y) for two rows of feed; |
Number of mounting heads |
2individual |
Maximum number of material stacks for tape production |
50In the case of all 8MM tapes, the left feeding slot will be made into a standard rear feeding slot option |
Maximum Bulk |
ICNumber of material stacks: 10 |
full page |
ICCan hold 1 quantity |
Quantity of tube loading stack |
4In the case of all SO8, vibration Feida is optional |
The fastest mounting speed |
10000PCS/H |
positioning accuracy |
0.03MM |
Fastest moving speed |
2M/S(Performance comparable to servo system) |
Support component size |
0402-5050， SOP, TQFP, etc., support tape width (8MM, 12MM, 16MM, 24MM), |
The thickness of the braided component is less than |
3.5MM |
Equipment size |
L870MM*W640*H336(Left side row of feeding slots), L870MM * W885 * H336 (left and rear two rows of feeding slots) |
vacuum air pump |
Brushless hollow cup silent type, -92KPA |
Number of air pumps |
3individual |
power supply |
220V， 50HZ (switchable to 110V AC [export]) |
Average power |
160W |
weight |
65KG(Approximately 35KG without packaging) |
Mounting area:
When only feeding on the left side: maximum mounting area 370mm * 450mm (X * Y)
Simultaneous feeding on the left and rear sides: maximum mounting area 370mm * 390mm (X * Y)
Feeding method: Left side feeding and rear side feeding, capable of attaching up to 50 different materials to meet most requirements
Demand for electronic products.
Improvement point: There are more types of stickers available.
Add IC mechanical correctors.
Improvement point: IC corrector, the added corrector enhances the mounting effect
Add standard disk mounted IC mounting function.
Improvement point: Supports the placement of disk mounted ICs, and this design enhances the overall performance and functionality of the machine.
Note: If the user has multiple ICs, they can contact customization
Specially designed IC tray, capable of simultaneously mounting multiple ICs, with a customization fee of 300 yuan per tray.
Increase vibration in Feida
Improvement point: Supports the placement of tube mounted ICs, and this design makes the functionality more powerful.
Note: For products with a large number of tubular ICs, this Feida can be optionally selected. Optional cost:
1000 Yuan/piece, only one device can be installed.
Improved positioning method:
Yellow marking: Fixed positioning strip
Red marker: movable locator bar
Blue mark: movable positioning needle, (with multiple specifications, factory configuration of 12), low positioning flexibility, unable to achieve optimal performance.
The biggest highlight of this design is that multiple different products can be placed in the mounting area, saving the trouble of frequent material changes for different products. In addition, the flexible positioning performance minimizes the distance between material retrieval and pasting, improving the efficiency of pasting.
Positioning pin positioning strip.
Improvement of feeder:
Improvement point: In the early days, the feeder of the product was single, which was suitable for different products and different needs
Changes are quite inconvenient, but the biggest highlight of this design is that it can cater to each customer's needs based on their own preferences
Tailored circuit boards can achieve optimal mounting efficiency.
Electric nylon stripping clutch
Our company's patented product uses a feeder equipped with a nylon stripping clutch, which can be controlled by
Adjust the strength of nylon peeling on the interface.
Improvement point: The nylon peeling used in early products adopts a winding method, with mechanical adjustment of force and shorter lifespan compared to electric adjustment. The winding method requires cleaning the nylon inside the winding disc at regular intervals. This design has no limit on the length of nylon, making it more convenient for customers to use.
Screen improvement:
Improvement point: Compared to early machines, it uses
3.2 The inch resistive touch screen has been upgraded to a 7-inch high-definition capacitive touch screen in the 3rd generation product, making operation more convenient. Motor Feedback-Systems
Improvement point: Early surface mount machines did not come with a drive feedback system, making it impossible to detect motor out of step. The 3rd generation product has added X, Y, Z, and 3-axis feedback systems, and there will be no more out of step phenomenon during the entire machine operation process. External force impact will also automatically reset.
High voltage drive system
Improvement points: In the early days, ordinary drive modules were used for surface mount machines, and the motor operating speed was limited. 3rd generation products
By incorporating a high-voltage drive system, the entire motion system has been more than doubled.
Similar Product Recommend
