-
E-mail
1027607493@qq.com
- Phone
-
Address
No. 152 Panyuan Road, Changxing Town, Chongming District, Shanghai
Shanghai People's Electric Appliance Factory
1027607493@qq.com
No. 152 Panyuan Road, Changxing Town, Chongming District, Shanghai
1、 Product Features
● Rebound limit switch
● Sturdy and sturdy, made of zinc alloy and thermoplastic rings
The product has a small volume and is waterproof and oil resistant
The built-in micro switch has spring plates, providing a longer mechanical lifespan
● Has significant OT actions
There are various types of induction devices, which are convenient to use
2、 Product contact form

3、 Product Features
| Operation speed | 0.01mm to 50cm/s (lock plunger type) |
| Action frequency | 120 times/minute |
| Contact resistance | Below 15m Ω (initial value) |
| insulation resistance | 100M Ω or above (at 500VDC) |
| Electrical endurance value | Non connected terminals: 1000VAC、50/60Hz, Continuous 1 minute current and no-load current between terminals and ground in parts: 1500VAC, 50/60Hz for 1 minute |
| vibration | Durability of misoperation: 10 to 55Hz, 1.5mm amplitude |
| action | Mechanical durability: 1000m/S2 (approximately 100G's) Durability of misoperation: 300m/S2 (approximately 30G's) |
| Operating temperature | When in use: -10 to+80 ℃ |
| humidity | Below 95% (at+20 to+35 ℃) |
| service life | Mechanical: Over 10000000 cycles (at rated OT value) Electrical: Over 500000 cycles |
| weight | About 60g |
| form | TZ-7100 | TZ-7110 | TZ-7310 | TZ-7311 | TZ-7312 | TZ-7120 | TZ-7140 | TZ-7121 | TZ-7141 | TZ-7124 | TZ-7144 | TZ-7166 |
| OF maximum | 600g | 600g | 600g | 600g | 600g | 150g | 220g | 180g | 240g | 200g | 280g | 120g |
| RF minimum | 100g | 100g | 100g | 100g | 100g | 40g | 60g | 50g | 80g | 60g | 100g | |
| PT maximum | 2.0mm | 2.0mm | 2.0mm | 2.0mm | 2.0mm | 13.5mm | 8.5mm | 11.0mm | 6.5mm | 11mm | 6.5mm | 25mm |
| OT minimum | 0.8mm | 5.0mm | 6.0mm | 6.0mm | 6.0mm | 4.0mm | 2.5mm | 3.0mm | 2.0mm | 3.0mm | 2.0mm | 11mm |
| MD maximum | 0.8mm | 0.8mm | 0.8mm | 0.8mm | 0.8mm | 3.2mm | 2.0mm | 2.4mm | 1.5mm | 2.4mm | 1.5mm | |
| OP | 30.8±0.8mm | 44±1.2mm | 21.8±1.2mm | 33.3±1.2mm | 25±1mm | 25±1mm | 40±1mm | 40±1mm | 50±1.2mm | 50±1.2mm | ||
| FP | 35mm | 35mm | 46mm | 56mm | ||||||||