Tempmate M2TH Repeatable Temperature and Humidity Recorder

Tempmate M2TH Repeatable Temperature and Humidity Recorder

The Tempmate M2TH is a repeatable USB temperature and humidity recorder launched by Tempmate in Germany. It is the same size and platform as the M2T, but integrates high-precision temperature and humidity sensors in the same body. It can also be connected to an external temperature and humidity sensor or a single temperature probe, achieving "one machine, two measurements". Mainly targeting cold chain and warehousing scenarios that are sensitive to both temperature and humidity, such as pharmaceuticals, food, electronics, etc. 20 per box

1. built-in sensor
   温度： -30 °C ~ +70 °C，±0.3 °C（-20 °C ~ +40 °C）/ ±0.5 °C
   湿度： 0 %RH ~ 100 %RH，±3 %RH（20-80 %RH，25 °C）/ ±5 %RH
2. External probe (optional)
   Temperature and humidity probe: -40 ° C~+90 ° C, 0-100% RH
   PT100 single temperature probe: -80 ° C~+200 ° C
   The probe is plug and play, and the host automatically recognizes and switches data sources
3. Storage and Battery
   Capacity: 60000 records (one for temperature and one for humidity)
   Battery: Users can replace CR2450, with a 10 minute interval of ≥ 24 months
   Low battery LCD prompt, data power-off saving
4. Chassis and Display
   Size: 100 × 53 × 12 mm, 54 g
   Protection: IP52 (dustproof, vertical drip)
   LCD: Real time temperature, humidity Max/Min、 Alarm, battery level
   LED: Red/Green Status Indicator

1. Plug and Play
   USB-A direct connection to computer, automatically generates non editable PDF+CSV within 30 seconds
   PDF contains temperature and humidity curves Min/Max/MKT、 Dew point, alarm event, calibration certificate
2. TempBase ® 2 free clients
• 6-section alarm (3 sections for temperature and humidity), with adjustable delay and accumulation time
• Record interval 10 s~11 h 59 min
• Start/stop mode: button, timed, temperature triggered
• The device can be written with protection to prevent on-site errors
3. Offline configurator (optional)
   Scan with an infrared pen to issue templates, suitable for bulk distribution in warehouses

1. Medical GDP
• Vaccine cold storage verification: The host is hung on the wall to record the ambient temperature and humidity, and an external probe is placed at the evaporator return air outlet to verify whether condensation water is generated during the defrosting stage
• Dry ice transportation of biological samples: Replace with PT100 probe, maintain ± 0.5 ° C during the -80 ° C stage, report with "dew point" to prove no condensation risk
2. Food EN12830
• Chocolate/milk powder shipping: Built in sensor placed in container, red light on when humidity>70% RH, driver can add desiccant on site to avoid clumping/frosting
• Quick freezing tunnel: Insert an external temperature and humidity probe into the packaging center to verify the "maximum ice crystal generation zone" time and whether surface condensation occurs
3. Electronics and Precision Manufacturing
• PCB sealed packaging: If the humidity exceeds 30% RH, it is considered that the vacuum bag has failed, and the recipient can reject it on the spot
• Lithium battery aging room: high temperature and high humidity 85 ° C/85% RH durability test, PT100 and built-in sensor comparison calibration

Tempmate M2TH Repeatable Temperature and Humidity Recorder