Three purpose digital display constant temperature water bath pot

Product Features:

1. The inner liner is made of stainless steel material, and the upper cover adopts a mirror panel, which is beautiful and practical.

2. The three hole three temperature water bath has three independent temperature control systems.

3. Adopting microcomputer PID intelligent control, with high temperature control accuracy and digital display of temperature.

Technical Specifications:

1. Model: DK-8D

2. Power supply: 220V 50Hz

3. Heating power: 400W × 3

4. Temperature control range: Room temperature -100 ℃

5. Temperature fluctuation: ± 0.3 ℃

6. Display resolution: 0.1 ℃

7. Capacity: 2.5L × 3

8. Working slot opening size: diameter 120mm

9. Dimensions: 500 * 320 * 310mm

10. Inner container size: 140 * 140 * 130mm

usage method:

1. First, add water to the sink, then turn on the power and turn on the corresponding power switches. The temperature controller will light up.
2. Click the function key, and the numbers on the temperature controller will start flashing. Click △ or ▽ to select the temperature that needs to be set. Once the setting is complete, click the function key again to exit the setting state, and then run at the set temperature.
3. Place test tubes and flasks as needed, turn off the power after use, drain the water and wipe clean.

Notes:

1. All technical indicators of this product have undergone actual operation inspection before leaving the factory. If the user needs to use a self provided thermometer (with certain accuracy) for measurement due to process requirements, the user's thermometer shall prevail. If there is a difference between the displayed value of the temperature control instrument and the thermometer, the user can adjust the internal parameters of the temperature control instrument slightly to meet the process requirements.
2. When using, be sure to add water before powering on, and dry burning is strictly prohibited.
3. When using, it is essential to have a reliable grounding to ensure safe use.
4. If the water level is lower than the electric heating tube, it is not allowed to use it with electricity to prevent the electric heating tube from bursting and being damaged.
5. The water level should not be too high to prevent water from overflowing into the electrical box and damaging components.
6. Regularly check whether the screws of each contact are loose, and if they are loose, tighten them to maintain good contact of each electrical contact. When the instrument is not used for a long time, the water in the sink should be drained and wiped clean, and the scale in the sink should be regularly removed.
7. If any abnormal working phenomenon occurs, it should be checked and repaired in a timely manner. If the fault cannot be accurately determined, contact the company's technical department.