UHF intelligent reader/writer (four port reader/writer)

NegotiableUpdate on 04/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Introduction Function Features Technical Parameters Application Fields This product can be connected to 4 antennas, with an N-male dual frequency feeder for the antenna interface. The length can be determined according to the construction situation, and the gain of the antenna should also be selected based on the height and width of the on-site door

Product Details

Product Introduction

Functional Features

Technical Parameter

application area

This product can connect to 4 antennas, with an N-male dual frequency feeder for the antenna interface. The length can be determined according to the construction situation, and the gain of the selected antenna should also be determined based on the height and width of the on-site door. Features: Easy installation, can read around 300 labels in 10 seconds.

Beautiful and lightweight, easy to install, combined with unique and efficient signal processing algorithms, it achieves fast reading and writing processing of electronic tags while maintaining high recognition rates.

Product Technical Parameters

size	22717040mm
Product Features	Beautiful and lightweight, easy to install, combined with unique and efficient signal processing algorithms, it achieves fast reading and writing processing of electronic tags while maintaining high recognition rates.
standard module	Based on R2000 design, excellent multi tag anti-collision function fully supports electronic tags that comply with EPC CLASS1 G2 standard;
Operating Frequency	902-928MHz (can be adjusted according to the requirements of different countries or regions)
Launch method	Operate in broad-spectrum frequency hopping (FHSS) or fixed frequency transmission mode;
output power	Up to 30dBm (adjustable);
Read label distance	4 external TNC antenna interfaces (external 4DBI antenna can read 3-4 meters);
Working mode	Support multiple working modes such as active, responsive, and triggered;
Conflict prevention mode	Support both EPC and TID conflict prevention modes;
power supply	Low power design, powered by a single+9V power supply;
interface	Support multiple user interfaces such as RS232, RS485, and TCPIP networks;
other	Built in buzzer and indicator light;
	Highly reliable design to meet the requirements of harsh working environments;
	The ability to read labels simultaneously is greater than 200 sheets per second
application area	It can be widely used in various wireless radio frequency identification (RFID) systems such as intelligent tool management in power warehouses, bank file management, manufacturing assembly line management, asset management, logistics management, etc.
Power interface DC JACK	Serial Number	symbol	describe
	Central	PWR	Positive 9V power supply
	Outer	GND	grounds

General Purpose Input/Output Interface GPIO (DB15 Female)	Serial Number	symbol	describe
	1	Output1	Universal output port 1
	2	Output2	Universal output port 2
	3	Output3	Universal output port 3
	4	Output4	Universal output port 4
	5	Output5	Universal output port 5
	6	Output6	Universal output port 6
	7	Output7	Universal output port 7
	8	Output8	Universal output port 8
	9	TGIN	Trigger input terminal (internally pulled up to+5V through a 10k resistor)
	10	R+	RS485 interface R+terminal
	11	R-	RS485 interface R-terminal
	12	GND	signal ground
	13	NO	Built in relay with constant starting point
	14	NC	Built in relay normally closed end
	15	CM	Built in relay common terminal

Serial communication interface RS232 (DB9 Male)	Serial Number	symbol	describe
	1	nc	Reserved
	2	TXD	General Output2
	3	RXD	General Output3
	4	nc	Reserved
	5	GND	signal ground
	6	nc	Reserved
	7	nc	Reserved
	8	nc	Reserved
	9	nc	Reserved

Indicator lights LED1~LED7	Serial Number	symbol	describe
	1	LED1	Antenna 1 working instruction
	2	LED2	Antenna 2 working instruction
	3	LED3	Antenna 3 working instruction
	4	LED4	Antenna 4 working instruction
	5	LED5	Detected label indication
	6	LED6	Reader working instructions
	7	LED7	Power indicator

specifications	project	symbol	minimum	typical	maximum	unit
	supply voltage	VCC	8	9	12	V
	Working current	IC		600	1500	mA
	Operating Frequency	FREQ	902		928	MHz
	size	Size		23017040mm		mm
	size	Size		23017040mm		mm

Can be widely applied to the following management:

1. Intelligent tool and electrical warehouse management system;

2. Bank file management;

3. Manufacturing assembly line management;

4. Asset management of power instruments and meters;

5. Logistics management and various wireless radio frequency identification (RFID) systems.