UHF twelve port reader/writer

NegotiableUpdate on 04/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Introduction Function Features Technical Parameters Application Fields Product Introduction This ultra-high frequency reader/writer can read electronic tag information in a fixed manner. Combined with software development and efficient signal processing algorithms, it can achieve fast reading and writing processing of electronic tags while maintaining high recognition rates. It can connect to 12 antennas and be independently controlled. It can also be used in environments that require multiple antenna connections. It can read electronic tags accurately, without misreading or missing readings

Product Details

Product Introduction

Functional Features

Technical Parameter

application area

Product Introduction

This ultra-high frequency reader/writer can read electronic tag information in a fixed manner, combined with software development and efficient signal processing algorithms, to achieve fast reading and writing processing of electronic tags while maintaining high recognition rates. It can be connected to 12 antennas and independently controlled, and can be used in environments that require multiple antennas. It can read electronic tags accurately, without misreading or missing readings.

Functional Features

Based on R2000 design, excellent multi tag anti-collision function fully supports electronic tags that comply with EPC CLASS1 G2 standard; Supports multiple communication interfaces such as RS232 and RJ45 (TCPIP), and can be optionally powered by POE network.

Product Technical Parameters

size	22717040mm
Product Features	This product is a high-performance fixed reader/writer for ultra-high frequency electronic tags customized and developed by Xi'an Afadi Company. It combines proprietary efficient signal processing algorithms to achieve fast reading and writing processing of electronic tags while maintaining high recognition rates. It can be connected to 12 antennas and independently controlled.
standard module	Based on R2000 design, excellent multi tag anti-collision function fully supports electronic tags that comply with EPC CLASS1 G2 standard;
Operating Frequency	Operating frequency: 860~868MHz/902~928MHz (can be adjusted according to the requirements of different countries or regions)
Launch method	Operate in broad-spectrum frequency hopping (FHSS) or fixed frequency transmission mode;
output power	Up to 30dBm (adjustable);
Read label distance	12 external SMA antenna interfaces, supporting automatic antenna micro tuning and antenna failure detection;
Working mode	Support multiple working modes such as active, responsive, and triggered;
Conflict prevention mode	Support both EPC and TID conflict prevention modes;
power supply	Low power design, powered by a single+9V power supply;
interface	Supports multiple communication interfaces such as RS232 and RJ45 (TCPIP), and can be optionally powered by POE network;
other	Support firmware online upgrade.
	Highly reliable design to meet the requirements of harsh working environments;
	Support internal caching of 800 tags (maximum EPC length 496bits);

Power interface DC JACK	Serial Number	symbol	describe
	Central	PWR	+9V power supply
	Outer	GND	grounds

General Purpose Input/Output Interface GPIO (DB15 Female)	Serial Number	symbol	describe
	1	Output1	Universal output port 1
	2	Output2	Universal output port 2
	3	Output3	Universal output port 3
	4	Output4	Universal output port 4
	5	Input1	Universal input port 1 (pulled down to ground through a 47K resistor internally)
	6	Input2	Universal input port 2 (pulled down to ground through a 47K resistor internally)
	7	Input3	Universal input port 3 (pulled down to ground through a 47K resistor internally)
	8	Input4	Universal input port 4 (pulled down to ground through a 47K resistor internally)
	9	TGIN	Trigger input terminal (internally pulled up to+5V through a 10k resistor)
	10	R+	RS485 interface R+terminal
	11	R-	RS485 interface R-end
	12	GND	signal ground
	13	NC	Built in relay normally closed end
	14	NO	Built in relay with constant starting point
	15	CM	Built in relay common terminal

Serial communication interface RS232 (DB9 Male)	Serial Number	symbol	describe
	1	NC	Reserved
	2	TXD	Serial communication data output terminal
	3	RXD	Serial communication data input terminal
	4	NC	Reserved
	5	GND	grounds
	6	NC	Reserved
	7	NC	Reserved
	8	NC	Reserved
	9	NC	Reserved

Indicator lights LED1~LED7	Serial Number	symbol	describe
	1	LED1	Working instructions for antennas 1-4
	2	LED2	Antenna 5-8 working instructions
	3	LED3	Antenna 9-12 working instructions
	4	LED4	reserve
	5	LED5	Detected label indication
	6	LED6	Reader working instructions
	7	LED7	Power indicator

application area

1. Intelligent power warehouse management

2. RFID library management

3. RFID logistics traceability

4. Military asset management

5. Management of valuable aviation materials

6. Management of bank archives and data

7. Management of valuable information of classified agencies

8. Various wireless radio frequency identification (RFID) systems for management and production process control in the automotive manufacturing industry.