Universal tensile testing machine (with clamp)

Tensile testing machine(Non standard customization is possible)

Main functions of tensile testing machine

The tensile strength tester is suitable for industries such as aerospace, petrochemicals, machinery manufacturing, metal materials and products, wires and cables, rubber and plastic, paper products and color printing packaging, adhesive tapes, bags and handbags, textile fibers, food, pharmaceuticals, etc. It can test the physical properties of various materials, finished products, and semi-finished products. Various fixtures can be selected for tensile, compressive, tensile, compressive, bending, tearing, peeling, adhesion, shear, and other tests. It can perform tests according to national or international standards such as GB, ISO, ASTM, BS, DIN, JIS, etc., making it an ideal testing and research equipment for factories, technical supervision departments, inspection agencies, research institutes, and universities.

Characteristics of tensile testing machine

1. The dynamic base is complemented by aluminum alloy profile columns that have undergone advanced spray coating treatment;
2. The use of high-precision, gapless ball screws and timing belts ensures the accuracy of the transmission system;
3. Fully computerized data acquisition and motion control;
4. The fully open testing software under the Windows XP operating system allows users to complete almost all mechanical testing projects using the existing software functions, and can also edit testing methods according to their actual needs. The test results can be shared with most automated office software such as Office;
5. Better than level 1 force measurement accuracy, 1/200000 force resolution, and deformation measurement resolution up to 0.0001mm;
6. Reserved interfaces for metal extensometers, displacement encoders, and large deformation two-point extenders to facilitate user selection;
7. On the basis of fully computer-controlled operation, an external manual control box can also be selected to achieve the purpose of operating the instrument.

Installation and commissioning of dual arm tensile testing machine

Production and installation of tensile testing machine

Technical parameters of tensile testing machine

Maximum test force: 5kN
Test force measurement range: 2% -100% FS
Test force measurement accuracy: better than ± 1%
Test force resolution: 0.005% FS
Extensometer: high and low temperature extensometer
Gauge length: 50mm, 100mm
Deformation measurement range: 10mm
Measurement accuracy: better than ± 1% of the indicated value
Displacement measurement accuracy: ± 1%
Beam displacement speed: 0.001mm/min~500mm/min stepless speed regulation
Speed accuracy: ± 1%
Test width: 420mm
Stretching stroke: 1300mm
Protection functions: overload protection, limit protection, overcurrent, overvoltage, and overtemperature protection;
Host power supply: 0.4kW, AC220V ± 10%, 50Hz, two-phase;
Working environment: Room temperature of 10-35 ℃, humidity of 20% -80%;
Software and user interface: Chinese interface on Windows 2000/XP platform;
Dimensions: 560x350x1280

Types of fixtures for tensile testing machines

Tensile testing machine fixture

Maintenance and upkeep of tensile testing machine

1. Before testing, the tensile testing machine must ensure that the system is preheated for at least 20 minutes in advance to minimize temperature effects.
2. The buffer oil should be kept clean, and when the oil level is less than two-thirds of the cylinder depth, it should be replaced immediately.
3. Before starting the tensile strength testing machine, check whether lubricating oil should be added to the friction active parts.
4. Before adding the test piece, the brake handle must be stuck and released after adding the test piece.
5. The main bearing of the dynamometer is not allowed to be oiled. The friction wheel surface inside the gearbox must not be oiled or splashed with oil stains, and the friction surface should be absolutely clean
We need to violently impact the inclined block on the swing arm.
6. After the experiment is completed and the power is cut off, clean the surface of the testing machine and provide timely protection to prevent surface rust.
7. On average, the tensile machine is maintained 2 to 3 times a month.

Technical parameters of tensile testing machine

Manufacturer service and after-sales service

Pre sales:Professional technical consultation, providing the best equipment solutions (equipment selection, product testing plan, laboratory construction plan).
On sale:Customer communication and progress updates; Equipment related guidance, installation, debugging, testing, etc; Coordinate calculations.
After sales:One year warranty, lifetime maintenance!
1. Technical training: operation and use, daily maintenance, common fault detection and troubleshooting
2. Regular follow-up visits: equipment inspection, troubleshooting, and dissemination of the latest news
3. Special reserve support for spare parts and components
4. The after-sales service department provides quick response for repair services
5. Full time maintenance personnel ensure timely and effective troubleshooting

Service Commitment and Maintenance

Promise one-year warranty and lifetime maintenance! On site installation, product knowledge training, 100% brand manufacturer independent production, 24-hour customer service guidance.
Method: 24/7 customer service hotline, specialized equipment service email
Requirement: Provide a clear response within 4 hours. If on-site service is required, it is required to be in place within 24 hours within the province, and outside the province, it is required to depart from Dongguan or handle at the provincial office within 24 hours.

contacts:Mr. Huang (Sales Manager)
Telephone:
Mobile phone:136-6299-5295
Fax:
24-hour service mobile phone:
Address:No. 240 Wentang East Road, Dongcheng Street, Dongguan City