Waterproof and Rainproof Test Room

Car Rain Test Room (customizable according to customer requirements)

Usage of Rainy Test Room Products

Walk in waterproof test room, car rain test room, walk in waterproof test room. This test is used to test the product performance pointer and quality management under the conditions of heavy rainstorm, wind blown heavy rain, sprinkler system, wheel splashing, flushing or violent sea waves when the product may be subject to flushing at different ambient temperatures during transportation, storage or use.

Rain test room/walk-in waterproof test room (customizable non-standard)

The rain test room meets the standards

• GB/T 2423.38-2006/IEC 6008-2.18:2000 Swing Pipe Spray Test Method

• GB/IEC60529-2001 Degrees of Protection Provided by Enclosures

Product characteristics of rain test room

1. The laboratory is assembled with tempered glass around it, and the top of the laboratory is treated with a suspended ceiling. At the bottom, individual umbrellas are installed on the floor after rain
2. IPX1~IPX8 waterproof testing devices are installed inside the laboratory, and each testing device can be used independently
3. LCD touch screen controller+PLC with different waterproof fittings, easy to operate and precise control
4. The closed-loop control method of the private server motor accurately controls the angle of the swing tube, ensuring stable usability
5. Spray water humidity control and optional, standard types do not control water temperature
6. Multiple sets of swing tubes can be selected, and different sizes of swing tubes can be replaced according to different product sizes during use
7. The drip test device can control different drip distances according to the size of the product, adjust the motor to automatically lift the drip box height, and customize the drip area as desired
8. The high-pressure water pump controls the flushing flow and pressure, and the precise machining nozzle is made of SUS304 # stainless steel material, which is easy to replace
9. Different water tanks can be made to simulate the actual working conditions of the product based on its underwater working depth
10. The required waterproof device can be selected according to different waterproof levels to meet different waterproof testing requirements

Construction and installation diagram of rain test room on site

Technical parameters of rain test room

model:RL-HJ-30000LH

Waterproof grade:IPX1、IPX2 | IPX3、IPX4 | IPX5、IPX6 | IPX7、IPX8

Nozzle diameter:0.4mm | 0.4mm | 6.3mm、12.5mm |

Main technical parameters:

The drip area and drip height can be customized according to the actual size of the product, with a drip intensity of 1.9~3.8L/h and a drip aperture of 25mm;

The swing tube can be customized according to the product size. If a sprinkler head is required for IPX4 testing, instructions need to be provided when ordering. The swing tube radius is 200, 400, 600, 800, 1000, 1200, 1400, 1600mm, and can be customized at will. Each nozzle has a water spray volume of 0.07L/min and a center to center distance of 50mm. The swing tube angle is 1-135 ° from the center to both sides;

The spray rate of the 6.3mm nozzle is 12.5L/min, with a severity level of 75L/min; The spray rate of the 12.5mm nozzle is 100L/min, and the spray distance is 2.5-3m;

IP7 uses the water tank method, IP8 uses the pressurized water tank method

Manufacturer service and after-sales service

Pre sales:Professional technical consultation, providing the best equipment solutions (equipment selection, product testing plan, laboratory construction plan).
On sale:Customer communication and progress updates; Equipment related guidance, installation, debugging, testing, etc; Coordinate calculations.
After sales:One year warranty, lifetime maintenance!
1. Technical training: operation and use, daily maintenance, common fault detection and troubleshooting
2. Regular follow-up visits: equipment inspection, troubleshooting, and dissemination of the latest news
3. Special reserve support for spare parts and components
4. The after-sales service department provides quick response for repair services
5. Full time maintenance personnel ensure timely and effective troubleshooting

Service Commitment

Promise one-year warranty and lifetime maintenance! On site installation, product knowledge training, 100% brand manufacturer independent production, 24-hour customer service guidance.
Method: 24/7 customer service hotline, specialized equipment service email
Requirement: Provide a clear response within 4 hours. If on-site service is required, it is required to be in place within 24 hours within the province, and outside the province, it is required to depart from Dongguan or handle at the provincial office within 24 hours.

contacts:Mr. Huang (Sales Manager)
Telephone:
Mobile phone:136-6299-5295
Fax:
24-hour service mobile phone:
Address:No. 240 Wentang East Road, Dongcheng Street, Dongguan City