The SSH-1 wet sieve instrument is suitable for measuring the sand content of drilling fluid and barite. The drilling fluid is placed on a filter screen and filtered by flushing with water to determine the sand content of the drilling fluid and barite, and the residual percentage can be obtained. ...
Product Introduction
The SSH-1 wet sieve instrument is suitable for measuring the sand content of drilling fluid and barite. The drilling fluid is placed on a filter screen and filtered by flushing with water to determine the sand content of the drilling fluid and barite, and the residual percentage can be obtained.
Place the drilling fluid on a filter screen, wash the drilling fluid with water, filter it, measure the sediment content of the drilling fluid and barite, and obtain the sieve residue percentage.
The working principle of the type wet screening instrument is to use water to pass through a specified pressure (the pressure displayed on the pressure gauge should be 10psi obtained by a pressure reducing valve) through a nozzle within a specified time to screen the drilling fluid or barite to be measured on a filter screen (220 mesh or 325 mesh) to obtain the residual percentage of the screen.
The working pressure and effective filtration area of Haitongda SSH-1 wet screening instrument are all based on API standards, with a drilling fluid cup capacity of 400ml.
Main technical parameters
| name |
Technical Specifications |
| Effective filtration area |
45.8cm2 (International API Standard 7.1in2) |
| work pressure |
10psi (International API Standard 10 pounds per square inch) |
| Drilling fluid cup capacity |
400ml
|