XLD-50 multifunctional slurry dissolving machine

Multi functional slurry dissolving machineAlso known as blood plasma machine, it adopts digital display, microcomputer temperature control, stable performance, and can set the temperature arbitrarily according to different needs. It is equipped with a swing system that can adjust the frequency, melt plasma, and perform melting and swinging simultaneously. It can be used after a few minutes of removal. Reduced procedures and facilitated workers. This series of products is widely used in laboratories for environmental protection, medical care, health and epidemic prevention, animals and plants, food engineering, etc.

1、 Multi functionalSlurry dissolving machineAs long as the technical parameters and characteristics are:

1: Temperature control range: Room temperature -37 ℃

2: Temperature control accuracy: ± 0.5 ℃

3: Digital temperature display, microcomputer temperature control.

4: Heating power ≤1000W

5: Thawing time, ≤ 10 minutes

6: Slurry volume<8 bags~16 bags (100-200ml)

7: There are 8 immovable stainless steel thawing blue pieces

8: Equipped with an automatic dual arm back and forth swing device that swings 60 times per minute or automatically adjusts the frequency.

2、 Multi functionalSlurry dissolving machinePrecautions

1: Set the water temperature, which can be turned on for a long time. When in use, turn on the swing switch, set the frequency, and it will automatically swing. After use, turn off the swing switch to save electricity and reduce mechanical wear.

2. Before use, be sure to add water to the water level line and avoid dry burning to protect the heating tube. As the startup time increases, the water in the water tank gradually evaporates. Please check the water level at any time (add water and replace it). Ensure that the machine is operating normally.

3.Set temperature, pressSETThe key can be used to set or view the temperature setpoint. pressSTEThe key characters start flashing, indicating that the instrument panel has entered the set state. Press△▽Key setting value increases or decreases, long press△or▽The key data will change quickly, press againSETThe key instrument panel returns to normal working state and the temperature setting is completed. The heating start indicator light is on.TI:pressSETKey to enter parametersTIThe settings,TIRepresents a timer, with units ranging from 0 to 999 minutes.0Indicates that the timed mode is turned off, otherwise when the instrument is workingTIAfter a few minutes, enter the stop state and stop the output of the load terminal. All parameters have been set, pressSETKey, save parameters and return to normal working state.

multi-functionalSlurry dissolving machineThe main products are:

1. Biochemical, light, oscillation, constant temperature and humidity incubator;
2. Electronic spirometer;
3. Water bath constant temperature oscillator, gas bath constant temperature oscillator, full temperature oscillation incubator;
4. Electronic constant temperature water bath, three purpose constant temperature water tank;
5. Electric centrifuge; tall，Low speed large capacity centrifuge;
6. Constant temperature magnetic heating stirrer;
7. DC digital constant speed electric mixer;
8. Multi purpose oscillator for speed regulation;
9. Quartz sub boiling still;
10. Analysis, epidemic prevention, and environmental protection instruments:
Carbon monoxide analyzer, carbon dioxide analyzer, digital sound level meter, radon detector, polarograph
Mercury analyzer, formaldehyde analyzer, digital illuminance meter, digital acidity meter, digital temperature and humidity meter, deepwater sampler, etc;