-
E-mail
2118237754@qq.com
- Phone
-
Address
No. 6, Zone 6, Times Headquarters Base, Tianqiao District, Jinan City
Product Categories
Jinan Mig Test Equipment Co., Ltd
XNR-400C Melt Flow Rate Tester
NegotiableUpdate on 10/02
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
1、 Product Introduction: XNR-400C Melt Flow Rate Tester XNR-400C Melt Flow Rate Tester
Product Details
1、 Product Introduction:
XNR-400C Melt Flow Rate Tester, complying with GB/T9643 GB/T3682 JB/T5456 and ISO1133 standards, is suitable for measuring the mass flow rate (MFR) and volume flow rate (MVR) of thermoplastic melt The determination of melt volume flow rate is achieved through displacement sensors and automatic timing systems. First, the time required for the piston to move a specified distance is measured, and then the volume flow rate is calculated according to the formula It is not only suitable for engineering plastics such as polycarbonate (PC), fluoroplastics, nylon, etc. with high melting temperatures, but also for testing plastics such as polyethylene (PE), polypropylene (PP), polyoxymethylene (POM), polystyrene (PS), ABS resin, etc. with low melting temperatures. It is widely used in the production of plastic raw materials, plastic products, petrochemicals and other industries, as well as relevant colleges, research departments and inspection departments.
2、 Features of the machine:
Using computer control, LCD display (setting): time, temperature, sampling frequency; Automatic printing of results, automatic cutting of materials, fast control speed, and self calibration of temperature; The quality method (MFR) and volume method (MVR) are two measurement methods with high accuracy and accurate data; The machine has a beautiful appearance, reasonable design, and stable performance, making it a popular model.
3、 Technical parameters:
1. Temperature control range: Room temperature to 400 ℃
2. Temperature control accuracy: ± 0.5 ℃
3. Temperature resolution: 0.1 ℃
4. Measurement range: 0.1~300g/10min (MFR)
5. Measurable: Mass method MFR, volume method MVR (unit: g/10min)
6. Load: 3.187~211.82N divided into eight levels
Level 1: 0.325kg=(piston rod+weight tray+insulation sleeve+No.1 weight body)=3.187N
Level 2: 1.200 kg=(0.325+No.2 0.875 weight)=11.77 N
Level 3: 2.160 kg=(0.325+No. 3 1.835 weight)=21.18 N
Level 4: 3.800 kg=(0.325+No. 4 3.475 weight)=37.26 N
Level 5: 5.000 kg=(0.325+No. 5 4.675 weight)=49.03 N
Level 6: 10.000 kg=(0.325+No. 5 4.675 weight+No. 6 5.000 weight)=98.07 N
Level 7: 12.500 kg=(0.325+No. 5 4.675 weight+No. 6 5.000+No. 7 2.500 weight)=122.58 N
Level 8: 21.600 kg=(0.325+2 # 0.875 weight+3 # 1.835+4 # 3.475+5 # 4.675+6 # 5.000+7 # 2.500+8 # 2.915 weight)=211.82 N
7. Measurement range of piston stroke: 0-50mm, accuracy: ± 0.05mm
8. Time measurement range: 0-1000S, accuracy ± 0.1 S
9. Cutting method: automatic
10. Mouth mold aperture: Φ 2.095 ± 0.005mm 11. Power: 450W
12. Power supply: 220V, 50Hz
13. Overall dimensions of the host: 290 × 410 × 630 mm
14. Working environment conditions: The ambient temperature ranges from 10 ℃ to 40 ℃; The relative humidity of the environment is between 30% and 80%; There is no corrosive medium around, and it should be correctly installed and leveled on a stable foundation. No strong air convection; There is no vibration or strong magnetic field interference around.
XNR-400C Melt Flow Rate Tester, complying with GB/T9643 GB/T3682 JB/T5456 and ISO1133 standards, is suitable for measuring the mass flow rate (MFR) and volume flow rate (MVR) of thermoplastic melt The determination of melt volume flow rate is achieved through displacement sensors and automatic timing systems. First, the time required for the piston to move a specified distance is measured, and then the volume flow rate is calculated according to the formula It is not only suitable for engineering plastics such as polycarbonate (PC), fluoroplastics, nylon, etc. with high melting temperatures, but also for testing plastics such as polyethylene (PE), polypropylene (PP), polyoxymethylene (POM), polystyrene (PS), ABS resin, etc. with low melting temperatures. It is widely used in the production of plastic raw materials, plastic products, petrochemicals and other industries, as well as relevant colleges, research departments and inspection departments.
2、 Features of the machine:
Using computer control, LCD display (setting): time, temperature, sampling frequency; Automatic printing of results, automatic cutting of materials, fast control speed, and self calibration of temperature; The quality method (MFR) and volume method (MVR) are two measurement methods with high accuracy and accurate data; The machine has a beautiful appearance, reasonable design, and stable performance, making it a popular model.
3、 Technical parameters:
1. Temperature control range: Room temperature to 400 ℃
2. Temperature control accuracy: ± 0.5 ℃
3. Temperature resolution: 0.1 ℃
4. Measurement range: 0.1~300g/10min (MFR)
5. Measurable: Mass method MFR, volume method MVR (unit: g/10min)
6. Load: 3.187~211.82N divided into eight levels
Level 1: 0.325kg=(piston rod+weight tray+insulation sleeve+No.1 weight body)=3.187N
Level 2: 1.200 kg=(0.325+No.2 0.875 weight)=11.77 N
Level 3: 2.160 kg=(0.325+No. 3 1.835 weight)=21.18 N
Level 4: 3.800 kg=(0.325+No. 4 3.475 weight)=37.26 N
Level 5: 5.000 kg=(0.325+No. 5 4.675 weight)=49.03 N
Level 6: 10.000 kg=(0.325+No. 5 4.675 weight+No. 6 5.000 weight)=98.07 N
Level 7: 12.500 kg=(0.325+No. 5 4.675 weight+No. 6 5.000+No. 7 2.500 weight)=122.58 N
Level 8: 21.600 kg=(0.325+2 # 0.875 weight+3 # 1.835+4 # 3.475+5 # 4.675+6 # 5.000+7 # 2.500+8 # 2.915 weight)=211.82 N
7. Measurement range of piston stroke: 0-50mm, accuracy: ± 0.05mm
8. Time measurement range: 0-1000S, accuracy ± 0.1 S
9. Cutting method: automatic
10. Mouth mold aperture: Φ 2.095 ± 0.005mm 11. Power: 450W
12. Power supply: 220V, 50Hz
13. Overall dimensions of the host: 290 × 410 × 630 mm
14. Working environment conditions: The ambient temperature ranges from 10 ℃ to 40 ℃; The relative humidity of the environment is between 30% and 80%; There is no corrosive medium around, and it should be correctly installed and leveled on a stable foundation. No strong air convection; There is no vibration or strong magnetic field interference around.
