Xinsheng Zhuorui 45 degree angle locomotive and vehicle material combustion tester

Xinsheng Zhuorui 45 degree angle locomotive and vehicle material combustion tester

Xinsheng Zhuorui 45 degree angle locomotive and vehicle material combustion tester
Scope of application: Suitable for 45 ° angle combustion testing of flame-retardant materials for locomotives and vehicles.
Applicable standard: TB/T3138-2006 "Technical Conditions for Flame Retardant Materials of Locomotive Materials"; GA303-2001 Flexible Flame Retardant Polyurethane Foam, TB/T2402-1993 Clause 6.2 attached figure requirements and TB/T3138 Appendix A requirements.
Technical Specifications:
1. Sample: 257 * 182mm;
2. Place the sample at a 45 ° angle tilt;
3. The vertical distance from the center of the fuel container bottom to the center of the sample is 25.4mm;
4. Fuel container with a diameter of 17.5mm x 7.1mm and a diameter of 0.8mm;
5. Experimental conditions: temperature of 15 ℃~30 ℃, humidity of 60% RH~75% RH.
Product Features:
1. The test stand is made of stainless steel plate (material);
2. The base length shall not be less than 400mm and the width shall not be less than 300mm;
3. The sample card slot design facilitates quick installation and removal of the sample;
4. Beautiful and practical appearance, good corrosion resistance, and high temperature resistance.

Keywords:
Locomotive and Rolling Stock Combustion Tester Vehicle Material Combustion Tester Combustion Tester Automotive Combustion Tester Combustion Tester

Locomotive and Rolling Stock Combustion Tester Vehicle Material Combustion Tester Combustion Tester Automotive Combustion Tester Combustion Tester

Locomotive and Rolling Stock Combustion Tester Vehicle Material Combustion Tester Combustion Tester Automotive Combustion Tester Combustion Tester

Locomotive and Rolling Stock Combustion Tester Vehicle Material Combustion Tester Combustion Tester Automotive Combustion Tester Combustion Tester