YDW type thermal oil electric heater

NegotiableUpdate on 09/30

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Its working principle: The electric heating heat transfer oil furnace uses electricity as its energy source. The heating element is directly inserted into the organic carrier (heat transfer oil) and added directly. Using a high-temperature circulation pump, the high-temperature heat transfer oil is forced to circulate in liquid phase, transferring heat to one or more heating equipment. After passing through the heating equipment, it returns to the heater through the circulation pump, absorbs heat again, and transfers it to the heating equipment. This process repeats itself, achieving continuous heat transfer and raising the temperature of the heated object to meet the heating process requirements.

Product Details

The electric heating thermal oil furnace consists of a heating unit (heating tube, high-temperature oil pump, filter), expansion tank, and electrical control cabinet as a complete set of equipment connected to the customer's heating equipment. Users only need to connect the power supply, medium inlet and outlet pipelines, and some electrical interfaces to use it.

The thermal oil heater adopts a digital temperature controller for temperature control, with functions of over temperature alarm, low oil level alarm, and over pressure alarm. It is an efficient and energy-saving heating equipment in industries such as chemical, petroleum, machinery, printing and dyeing, food, shipbuilding, textile, and film.

Performance characteristics:

1. It has advanced and complete operation control and safety monitoring devices, fully automatic control of the heating process, easy operation, and convenient installation.

2. It can achieve a high working temperature (≤ 340 ℃) at a lower operating pressure (<0.5MPA). When the oil temperature is 300 ℃, the operating pressure is only one seventieth of the saturated steam pressure of water, and the thermal efficiency can reach over 95%.

3. It can achieve stable heating and precise temperature regulation, with a temperature control accuracy of ± 1 ℃. There is no heat loss such as running, emitting, dripping, and leaking in steam boilers, with a heat utilization rate of 95% and energy savings of about 50%.

4. The equipment has a small volume and can be installed flexibly. It is recommended to install it near hot equipment without laying a foundation or requiring dedicated personnel to be on duty.

5. Durable: Operating according to proper procedures, the service life can reach more than ten years.

6. The heat transfer medium of the heating system is organic heat carrier - thermal oil, which is odorless, non-toxic, environmentally friendly, and non corrosive to equipment. Long service life, it is an efficient and energy-saving heating equipment of "low pressure and high temperature" type.

7. Customizable: Design the appearance according to customer requirements, with single unit power ranging from 12KW to 1000KW to choose from.

Application industry:

1. Petroleum and chemical industry: polymerization, condensation, distillation, melting, dehydration, forced insulation, etc;

2. Wood industry: pressure forming of plywood and fiberboard, heating of laminated board, heating of hot pressed board, temperature control of hydraulic press, wood drying, etc.

3. Oil industry: temperature control and heating of reaction vessels for fatty acid distillation, oil decomposition, concentration, esterification, vacuum deodorization, etc;

4. Plastic and rubber industry: hot pressing, rolling, extrusion, vulcanization molding, etc.

5. Synthetic fiber industry: polymerization, melting, spinning, stretching, drying, etc;

6. Textile printing and dyeing work: heat setting roller heating, drying room heating, heat capacity dyeing, etc;

7. Non textile industry: non-woven fabrics, etc;

8. Feed industry: drying, etc;

9. Paper industry: drying, corrugated paper processing, etc.

10. Building materials industry: gypsum board drying, asphalt heating, maintenance of concrete components, etc;

11. Mechanical industry: spray painting, printing and drying, etc;

12. Food industry: drying and heating.