YGCB high-temperature resistant silicone rubber cable

NegotiableUpdate on 12/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

YGCB high-temperature resistant silicone rubber cable is widely used in various industries such as lifting, transportation, machinery, electrical, steel, medicine, metallurgy, ports, mining, logistics, and warehousing for power connection, control, signal, lighting, and other mobile power devices with a voltage of 0.6/1kV and below.

Product Details

High temperature resistant silicone rubber cableYGCB

High temperature resistant silicone rubber cableYGCBDetailed information:

High temperature resistant silicone rubber cableYGCBApplication:

High temperature resistant silicone rubber cableYGCBWidely used in industries such as lifting, transportation, machinery, electrical, steel, medicine, metallurgy, ports, mining, logistics, warehousing, etc. for power connection and control, signaling, lighting, etc. of various mobile power devices with a voltage of 0.6/1kV and below.

YGCB High Temperature Resistant Silicone Rubber Cable Production Execution Standard: Adopting Enterprise Standards

YGCB high-temperature resistant silicone rubber cable has excellent characteristics such as high temperature resistance, flame retardancy, radiation resistance, aging resistance, ozone resistance, waterproofing, and has good cold resistance and weather resistance.

1. Rated voltage: UO/U is 0.6/1kV.

2. Allowable working temperature range for cables: silicone rubber insulation -60 ℃~180 ℃; Fluoroplastic insulation -60 ℃~200 ℃.

3. When YGCB high-temperature resistant silicone rubber cable is short circuited (with a duration of no more than 5 seconds), the high temperature of the cable conductor shall not exceed 250 ℃.

4. The temperature for cable laying should not be lower than -20 ℃.

5. The small bending radius of cable * * * is 10 times the length of the small edge of the cable

6.High temperature resistant silicone rubber cableThe structure of YGCB

Conductor: Copper core soft conductor (tin plated soft conductor can be used)

Insulation: using extruded silicone rubber insulation

Sheath: Adopting extruded silicone rubber sheath with a flat structure

Nominal cross-sectional area mm2	Conductor diameter mm	Insulation thickness mm	Sheath thickness mm	Spacing mm	Cable outer diameter mm	weight (kg)
4×1	1.29	0.8	1.6	1	17.76×6.09	225
6×1	1.29	0.8	1.6	1	25.54×6.09	308
8×1	1.29	0.8	1.6	1	33.32×3.09	360
4×1.5	1.56	1	1.6	1	20.44×6.76	291
6×1.5	1.56	1	1.6	1	29.56×6.76	360
8×1.5	1.56	1	1.6	1	38.68×6.76	469
4×2.5	2.05	1.4	1.6	1.5	27.1×8.05	333
6×2.5	2.05	1.4	1.6	1.5	39.8×8.05	536
8×2.5	2.05	1.4	1.6	1.5	52.5×8.05	608
4×4	2.60	1.8	1.7	1.7	33.3×9.6	457
6×4	2.60	1.8	1.7	1.7	49.1×9.6	790
4×6	3.15	2	1.9	2.0	38.4×11.5	615
6×6	3.15	2	1.9	2.0	56.7×11.5	1098
3×10	4.4	2.5	2.4	2.4	37.8×14.2	702
6×10	4.4	2.5	2.4	2.4	73.2×14.2	1428
3×25	6.81	2.8	2.7	2.8	48.23×17.81	1645
6×25	6.81	2.8	2.7	2.8	93.86×17.81	3325
4×35	7.9	3	3	3	70.6×19.9	2181
3×50	9.2	3.2	3.1	3.4	59.8×21.8	2681
4×50	9.2	3.2	3.1	3.4	78.8×21.8	3158
3×70	12.6	3.4	3.3	3.8	72.4×26	2878
3×120	15.4	3.8	3.07	4.2	84.8×30.4	5157
3×150	16.4	4	4.1	4.4	90.2×32.6	6171

The insulation resistance of finished cable cores, converted to a cable length of 1km, is the insulation resistance of finished cable cores

When the temperature is 20 ℃, the cross-sectional area of the conductive wire core should not be less than 50M Ω for wires with a cross-sectional area of 50mm2 or less, and not less than 35 M Ω for wires with a cross-sectional area of 70-185mm2. The finished voltage test of multi-core cables should withstand AC 50Hz, test voltage 3500V for 5 minutes, and insulation breakdown should not occur.