YXC-100 stainless steel electric contact pressure gauge

NegotiableUpdate on 12/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Jiangsu Runyi specializes in producing YXC-100 stainless steel electric contact pressure gauges, which are suitable for pressure measurement and control instruments in industrial fields such as petroleum, chemical, metallurgy, and power stations. They can be used in conjunction with electrical components such as relays to achieve automatic pressure control and alarm functions. This instrument drives the gear transmission through the displacement of the spring tube, which drives the contacts to connect or disconnect the circuit, completing the intelligent control of the pressure system.

Product Details

Product Name:YXC-100 stainless steel electric contact pressure gauge

Manufacturer: Jiangsu Runyi Instrument Co., Ltd

Product brand: Runyi

Product Overview:

Jiangsu Runyi specializes in productionYXC-100 stainless steel electric contact pressure gaugeIt is used to measure the positive and negative pressure of gas and liquid media that do not corrode copper and copper alloys, and to send a signal when the pressure reaches a predetermined value, connect the control circuit, and achieve the purpose of automatic control alarm. On the electric contact signal pin of the electric contact pressure gauge device, an adjustable magnetic steel is installed to increase the suction force of the contact, accelerate the contact action, make the contact reliable, eliminate the arc, and effectively avoid frequent disconnection of the contact point caused by working environment vibration or medium pressure pulsation of the instrument. So the electric contact pressure gauge has the advantages of reliable operation, long service life, and high contact switch power.

Product working principle:

The working principle of this productPrinciple is based on the fact that the spring tube in the measurement system undergoes corresponding elastic deformation and displacement at the end of the spring tube under the pressure of the measured medium. With the help of a pull rod and the transmission of a gear transmission mechanism, the measured value is gradually indicated on the dial by the indicator (along with the contact) on the fixed gear. At the same time, when it comes into contact with the contact point (upper or lower limit) on the set pointer (dynamic breaking or dynamic closing), it causes the circuit in the control system to be disconnected or connected, in order to achieve automatic control and send alarm signals.

Main technical parameters of the product:

Measurement range: Positive pressure 0~0, 1~60MPa
Negative pressure -0.1~0MPa
Positive and negative pressure -0.1~2.47MPa
Accuracy level: 1.6
Contact form: magnetic assisted direct acting type
Rated power: 30VA
High voltage: 380V
High current: 1A
Setting range: 5%~95% upper limit value
Environmental temperature: -20~60 ℃
Medium temperature: -10~70 ℃
Structural form: radial
Joint thread: M20 × 1.5
Explosion proof grade: Exd Ⅱ CT

Product selection table:

name	model	structural style	Measurement range (Mpa)	precision level	connect
average electric contact Point pressure gauge	YXC-60	radial	0～0.1； 0～0.16； 0～0.25； 0～0.4； 0～0.6； 0～1.0； 0～1.6； 0～2.5； 0～4； 0～6； 0～10； 0～16； 0～25；	2.5	thread M14×1.5
	YXC-60Ⅱ	Radial Rear
	YXC-60Ⅲ	Axial front
	YXC-60Ⅳ	axial
Magnetic assisted electric contact pressure gauge	YXC-100	radial	0～0.06； 0～0.1； 0～0.16； 0～0.25； 0～0.4； 0～0.6； 0～1.0； 0～1.6； 0～2.5； 0～4； 0～6； 0～10； 0～16； 0～25； 0～40； 0～60；	1.0 1.5	thread M20×1.5
	YXC-100Ⅱ	Radial Rear
	YXC-100Ⅲ	Axial front
	YXC-100Ⅳ	axial
	YXC-150	radial
	YXC-150Ⅱ	Radial Rear
	YXC-150Ⅲ	Axial front
	YXC-150Ⅳ	axial
General electric contact pressure vacuum gauge	YXCZ-60	radial	-0.1～0.06； -0.1～0.15； -0.1～0.3； -0.1～0.5； -0.1～0.9； -0.1～1.5； -0.1～2.4	2.5	thread M14×1.5
	YXCZ-60Ⅱ	Radial Rear
	YXCZ-60Ⅲ	Axial front
	YXCZ-60Ⅳ	axial
Magnetic assisted electric contact pressure vacuum gauge	YXCZ-100	radial		1.0 1.5	thread M20×1.5
	YXCZ-100Ⅱ	Radial Rear
	YXCZ-100Ⅲ	Axial front
	YXCZ-100Ⅳ	axial
	YXCZ-150	radial
	YXCZT-150Ⅱ	Radial Rear
	YXCZT-150Ⅲ	Axial front
	YXCZ-150Ⅳ	axial
General electric contact vacuum gauge	YXCZTX-60	radial	-0.1～0	2.5	thread M14×1.5
	YXCZTX-60Ⅱ	Radial Rear
	YXCZTX-60Ⅲ	Axial front
	YXCZTX-60Ⅳ	axial
Magnetic assisted electric contact vacuum gauge	YXCZTXC-100	radial		1.0 1.5	thread M20×1.5