ZXK

Selection

SYC-UZK-51 (standard flange type) working temperature: -10~+60 ℃ installation method: flange L=90 (± 5mm)



Overview
The SYC-UZK-50 series anti rotation level controller is a novel level controller that is particularly suitable for solid-state levels (powder, granular, block, gel, etc.) in industries such as chemical, environmental protection, petroleum, plastics, pharmaceuticals, grain, beverages, feed, and building materials.
The table has good sealing performance, strong overload capacity, easy installation and maintenance, and a large output contact capacity. It can be adjusted by adjusting the tension of the tension spring for materials of different densities.

working principle
The rotating blades are driven by the motor to rotate. When the measured material rises to a certain depth and the rotating blades are subjected to a certain resistance, the resistance is transmitted to the detection device inside the controller through the transmission shaft. The detection device outputs a switch signal and cuts off the power supply of the motor, causing the rotating blades to stop rotating. When the material falls, the resistance of the rotating blades is released, and the detection device returns to its original state through the action of a tension spring. When the motor resumes power supply, the rotating blades resume rotation, and the alarm is eliminated. The next time the measured material rises, the rotating blades will stop rotating;

Specification

1. Power supply: 220VAC;
2. Power: 4W;
3. Contact capacity: 250VAC, 10A, SPDT;
4. Static moment: 10kg.cm
5. Material density: ≥ 0.5g/cm3;
6. Slip torque: approximately 2.5-3kg.cm;
7. Operating temperature: ≤ 70 ℃ in the silo
8. Operating pressure: ≤ 0.2MPa
9. Protection level: IP65;

feature

1. Pure mechanical structure installation does not require adjustment;
2. Unique oil seal design can prevent dust from infiltrating along the shaft;
3. There is a slipping mechanism inside the instrument, which protects the motor from working normally even if the rotating blades are subjected to excessive force;
4. Adjustable torque;
5. All have good durability and extremely stable performance;
6. High position type: ≤ 200 ℃ in the silo

Outside the silo ≤ 55 ℃