-
E-mail
szpeng88@163.com
-
Phone
13714836101
-
Address
Building B, No. 3, 3rd Road, Yangyong Industrial Zone, Songgang Street, Bao'an District, Shenzhen
Shenzhen Ruitaier Testing Instrument Co., Ltd
Introduction to Technical Requirements for Electric Cigarette Resistance Testing Machine
Date: 2023-02-11Read: 9
Electric smoke resistance testing machine
1、 Product Introduction:
This machine is used to test electric cigarettes and e-liquids, using a cylinder piston suction system. By setting the corresponding smoking duration, smoking volume, and smoking frequency, the electric cigarette can be determinedZi SmokeWhether it is qualified and suitable for large and small power electricityZi Smoke.
Specifications
|
workstation |
2workstation |
breathing method |
Cylinder piston type (using 2 cylinders) |
Smoking volume |
100ML (The supplier shall ensure that the set volume and actual consistency error do not exceed 1ml |
Suction resistance control |
Automatic control of upper and lower limits of suction resistance, automatic alarm for exceeding the upper limit and falling below the lower limit |
duration |
1-9.9 Seconds(The supplier shall ensure that the corresponding set parameter values are achieved under a single port volume of 50-150ml |
Interval between each mouth |
1-999 Seconds |
Number of smoking ports |
1-999s |
power |
Stepper motor (6N/M)+PLC |
Cylinder push-pull mechanism |
ball screw |
Touch screen counter |
Technology can be set, reaching the set number of times automatically |
Button Function |
Independent control of electricityZi SmokeSwitch button (with a fixed strap similar to the one shown in the diagram, which can fix various types of electricity)Zi Smoke） |
special function |
The following process can be set up at once: (automatic volume control) For example, set 60ml per sip for 3 seconds with a 5-second interval between each sip, for a total of 300 puffs, with a 10 minute interval between every 50 puffs. |
Display and control mode |
Touch screen+PLC+self written program |