Application devices:Vacuum sintering furnace, vacuum hydrogenation furnace, vacuum strip furnace

Product Model:AI-719, AI-898, AI-516, etc

Application industry description:The upstream of the magnetic materials industry chain mainly includes the chemical materials industry, steel manufacturing industry, and various rare earth mining and smelting industries. The midstream is the production of soft magnetic materials and permanent magnet materials. The downstream products are electric motors, transformers, generators, and AC generators. The end products are applied in traditional fields such as consumer electronics and basic industries, as well as emerging application fields such as new energy and energy conservation and environmental protection. In the field of magnetic materials, customers independently develop supporting automation equipment such as vacuum strip spinning furnaces and vacuum sintering furnaces for process technologies such as strip spinning and sintering. This provides a new technological route for the production of magnetic materials, while achieving precise control of heavy rare earth elements and cost reduction.

Process Introduction:The horizontal sintering furnace is controlled in three zones: front, middle, and back, requiring high control accuracy, good synchronization, and sufficient stability. The application of Yudian AI-719 and AI-898 in sintering furnaces for magnetic materials can achieve synchronous heating with high stability, with a maximum control of 1150 ℃ and fluctuations within ± 1 ℃. The stability of Yudian products greatly improves the yield and quality of the products.

The value achieved by helping customers:The customer originally used imported temperature controllers such as Yokogawa from Japan, but there was no guarantee of after-sales and technical support during use. Yudian Energy develops products based on special functional requirements. If multiple temperature correction functions are needed on-site, Yudian promptly opens this function to customers to assist them in debugging and modifying software. The customer originally used imported instruments with high costs and unstable delivery times. After switching to Yudian instruments, they replaced the imported instruments in terms of functional accuracy and quality, helping the customer reduce costs and increase efficiency.