9210 silicon and phosphorus spectrophotometer

NegotiableUpdate on 11/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Z-09210=A=0300 9210 silicon and phosphorus meters are used in conjunction with 9210/9211 silicon and phosphorus meters.

Product Details

Z09210=A=0302

9210 silicon and phosphorus spectrophotometer

9210 silicon meter photometer

9211 phosphorus meter photometer

9210 silicon and phosphorus spectrophotometerUsed in conjunction with 9210/9211 silicon and phosphorus meters.

Testing steps for 9210 silicon meter photometer

-Enter the menu MAIN/MAINTENANCE/THE PUMPS/DAIN ON and drain the water from the measuring tank

-Enter the menu MAIN/MAINTENANCE/VALVE/VALVE 7 on to fill the measuring tank with water, close valve 7VALVE 7 off

-Open solenoid valve 1 VALVE 1 ON. Wait until the overflow cup is filled with water - enter the photometer detection menu MAIN/MAINTENANCE/HOTOMETER TEST

-When entering this menu, the sample water valve automatically opens and the sample water enters the measuring tank

-After the water in the overflow cup enters the measuring tank, press MES: At this time, the voltage value should be stable at 3500+/-20 mV

-If the voltage value is stable at this time but not 3500+/-20 mV

-Click BLACK: Its value should be 0.008+/-0.002

-Press REF: The instrument will automatically adjust the LED voltage and provide a reference voltage of 3500 mV. At this time, the LED voltage should be between 3500 and 7000

-If the LED voltage is not between 3500 and 7000 We need to clean the measuring tank.

-If the voltage value is unstable, the measuring slot should also be cleaned.

-If the voltage value stabilizes at 3500+/-20mV at this time

-Enter the menu MAIN/MAINTENANCE/THE PUMPS/PUMP 1 on and add 5 drops of R1.

-Return to the photometric detection menu Main/MAINTENANCE/HOTOMETER TEST

-Press MES and wait for 2-3 minutes.

-If the voltage value is unstable, it indicates that sodium molybdate has reacted with some impurities in the measuring tank. Therefore, the measuring tank should also be cleaned.

Spare parts for 9210 silicate/phosphate analyzer

serial number	name	Order Number
1	interface board	09200=A=5000
2	9210 silicon meter CPU board with display	09200=A=1000
3	9211 phosphate meter CPU board with display	09200=A=1011
4	power strip	09200=A=2000
5	RS 485, icult-striving completely civilized Modbus ）	09125=A=0485/2485
6	92XX internal bus communication board	09200=A=5500
7	2-meter internal connecting cable/4m/7m	370=302=034/304/307
8	921X measuring board (0~1000ppb SiO2/0~5ppm-PO4)	0921X=A=1500
9	9210 silicon meter measuring board (0-5000ppb SiO2)	09210=A=1510
10	9211 Phosphorus Meter Measurement Board (0~50ppm-PO4)	09210=A=1520
11	Pipe 4 × 6 (domestically formulated)
12	Sample water solenoid valve, NPS0,8（0,2~6bar）	689=118=008
13	O-ring (flow rate adjustment screw), 4 × 1mm
14	Sample water flow rate adjustment screw	09210=A=0105
15	Sample water level detector	09210=A=0250
16	O-ring (liquid level detector), 38 × 2mm
17	Sample water solenoid valve (overflow container)	689=118=024
18	921X connection plate (mixer/heater)	09210=A=1234
19	921X mixer	09210=A=0400
20	Magnetic stirring rod	226=003=013
21	heating element	09097=C=0560
22	Pt100 temperature probe
23	921X optical cable	09210=A=0500
24	921X optical mirror	09210=C=0340
25	921X mirror spacer	09210=C=0330
26	O-ring (optical mirror), 22 × 1mm
27	Square cover (photometer cell)	09210=C=0310
28	Reagent tube, 1,6 × 3,2mm	590=050=060
29	Insert the reagent tube, 0.8 × 1.6mm
30	Reagent pump	695=114=001
31	Calibration/flushing pump	695=004=004
32	921X2 liter reagent tank	495=020=001
33	921X reagent tube countersunk head	09210=A=0600
34	9210 silicon surface chemical reagent (excluding sulfuric acid)	09210=C=7000
35	9211 Phosphorus Surface Chemical Reagent (0-5ppm PO4, without sulfuric acid)	09211=C=7000
36	9211 Phosphorus Surface Chemical Reagent (0-50ppmPO4, without sulfuric acid)	09211=C=7001
37	9210 silicon surface agent (annual dosage)	09210=A=0507