A+K electromagnetic flowmeter

The A+K electromagnetic flowmeter consists of two parts: a sensor and a converter. It works based on Faraday's law of electromagnetic induction and is used to measure the volumetric flow rate of conductive liquids with a conductivity greater than 5 μ S/cm. In addition to measuring the volumetric flow rate of general conductive liquids, it can also be used to measure the volumetric flow rate of strong corrosive liquids such as strong acids and alkalis, as well as homogeneous liquid-solid two-phase suspensions such as mud and slurry. After setting the density, the mass flow rate of the conductive liquid can be measured. Widely used in industrial sectors such as petroleum, chemical, metallurgical, textile, papermaking, environmental protection, food, as well as municipal management, water conservancy construction, river dredging and other fields for flow measurement.

The AEMG series flowmeter can perform high-precision measurements under various process conditions, making it an economical flow measurement solution. The AEMG series transmitters have the following advantages: high reliability and measurement stability, and a unified operating mode. The AEMG series sensors have undergone magnetic circuit optimization design, resulting in low magnetic loss and minimal magnetic interference, greatly improving the magnetic field strength of the sensors and resulting in stronger signal output; The electrode undergoes special polishing treatment, resulting in low polarization voltage, improved noise resistance, and more stable signal output. After multiple experiments and tests, the AEMG-F series electromagnetic flowmeter adopts flange connection, with stable and reliable flow, high accuracy, no pressure loss, strong anti vibration, and easy installation and debugging.

Technical parameters of A+K electromagnetic flowmeter:

Nominal diameter: DN15~DN1200

Electrode materials: 316L, Hb, Hc, Ti, Ta, Pt

Lining materials: chloroprene rubber, polyurethane, PTFE, PFA, F46

Dielectric conductivity: ≥ 5 μ S/cm, softened water is 20 μ S/cm

Accuracy level:+0.5% RS~Soil 1.0% RS

Flow rate range: 0.3m/s~12m/s

Environmental temperature: -20 ° C~+60 ° C

Medium temperature: A: ≤ 80 ° C; B: ≤ 120 ° C; C: ≤ 180 ° C (split PTFE lining)

Nominal pressure: 0.6MPa~4.0MPa (according to caliber or special customization)

Protection level: IP65, IP67, IP68 (split)

Output signal: 4~20mA, frequency/pulse, alarm output

Communication output: RS485, RS232, MODBUS485, HART, PROFIBUS DP

Power supply voltage: 220VAC, 24VDC

Installation form: integrated or split

Flange standards: National Standard, American Standard, Japanese Standard, German Standard

Shell and flange materials: standard stainless steel, carbon steel, etc